rtl-sdr-blog VS esp8266_deauther

https://www.rtl-sdr.com/ is a good place to start for SDR articles, software and advise. Good luck.

I've reported it here: https://github.com/rtlsdrblog/rtl-sdr-blog/issues/18

Download the https://github.com/rtlsdrblog/rtl-sdr-blog or https://github.com/librtlsdr/librtlsdr version instead. Even try both, since there may be differences.

Take a look at the RTL-SDR, I have a Blog v3 and it's great.

This site has some great examples on what various inexpensive SDR hardware can be used for: https://www.rtl-sdr.com/. Use cases range from receiving weather satellite imagery, to reverse engineering radio protocols (e.g. for remote door openers). Several years ago I used an inexpensive DVB USB dongle containing the RTL2832U chip (which enables SDR), to sniff 2G/GSM broadcast packets.

Hashcat Cracking WPA/WPA2 Spacehuhn's Deauther

While magnet won't work, for wifi cameras you can safely and remotely deauthorize them (well, them and every other device on that access point) - tech is cheap and easily available (we're talking about $3 worth of hardware). Wired cameras generally don't enjoy ESD on their Ethernet cable pins. You can easily provide them with some using a piezo clicker from a cheap lighter.

Could I use a pi pico w to create a wifi deauther, like this ESP8266 Deauther | ESP8266 Deauther

Upload this on the bord https://deauther.com/ and have fun.. i use it to kick my nephew alle the time 😆🤣

here is link to the code https://github.com/SpacehuhnTech/esp8266_deauther

I already have a pwnagotchi, it’s not what im looking for in this case. I’m thinking more a pico version of this GitHub

With that said, I went this route and used the deauther app that comes pre installed with the [REDACTED] firmware.