multimon-ng VS librtlsdr

I have little experience with decoding radio signals so I don't know if any software decoders are expected to handle the clipping. I tried using multimon-ng and found that its UFSK1200 demodulator can get something out of the audio, but it also keeps repeating Error: stop bit is 0. Bad framing if verbose mode is enabled.

Sorry I gave wrong name, it is multimon https://github.com/EliasOenal/multimon-ng and is capable to decode:

It's likely that the signal is extremely strong. You can probably just pick it up with a short antenna indoors. I used MultiMonNG to decode. It's was pretty boring to be honest.

Give multimon-ng a whirl. This is CLI based, but can output what it decodes to a simple text file or hex data to do what you need with.

multimon-ng

POCSAG, FLEX (pagers), Morse, APRS and more with multimon-ng

multimon-ng for decoding various protocols.

Try this tool; https://github.com/EliasOenal/multimon-ng - It's CLI and you'll ideally want a Linux, but this can decode an awful lot more data modes like such.

Download the https://github.com/rtlsdrblog/rtl-sdr-blog or https://github.com/librtlsdr/librtlsdr version instead. Even try both, since there may be differences.

Give https://github.com/librtlsdr/librtlsdr a try?

I should have mentioned, I'm using this fork of the librtlsdr library, which contains a slightly different version of rtl_power with some extra features, and apparently the "-D" option is treated differently in the version I'm using. The forked version allows you to set a specific branch using the "-D" option, as described below:

There are a few variations of librtlsdr, f.e. this fork; https://github.com/librtlsdr/librtlsdr which adds features that aren't available in the version used in most Linux distributions. This adds some extra features and output that are really useful (most notably, regular output of max, min, mean power levels and noise floor). It also has some extra functions to fine tune signals.

Linux, librtlsdr and this port of DSD. FWIW, this port of DSD is newer and also has a Windows binary.

Next I moved onto try feeding the output of rtl_sdr (from https://github.com/librtlsdr/librtlsdr) to nrsc5 and that worked well!

You have an older librtlsdr; I'm using the GitHub version, which adds extra features; https://github.com/librtlsdr/librtlsdr

Thank you for your reply, I have tried it with the 'static' from the official GitHub https://github.com/librtlsdr/librtlsdr/releases , but the error remains? Do you mean an even newer version?

github.com/librtlsdr/librtlsdr may be worthy to check out.