mdloader VS qmk_toolbox

* QMK Toolbox 0.2.2 (https://qmk.fm/toolbox)* Supported bootloaders:* - ARM DFU (APM32, Kiibohd, STM32, STM32duino) via dfu-util (http://dfu-util.sourceforge.net/)* - Atmel/LUFA/QMK DFU via dfu-programmer (http://dfu-programmer.github.io/)* - Atmel SAM-BA (Massdrop) via Massdrop Loader (https://github.com/massdrop/mdloader)* - BootloadHID (Atmel, PS2AVRGB) via bootloadHID (https://www.obdev.at/products/vusb/bootloadhid.html)* - Caterina (Arduino, Pro Micro) via avrdude (http://nongnu.org/avrdude/)* - HalfKay (Teensy, Ergodox EZ) via Teensy Loader (https://pjrc.com/teensy/loader_cli.html)* - LUFA/QMK HID via hid_bootloader_cli (https://github.com/abcminiuser/lufa)* - LUFA Mass Storage* Supported ISP flashers:* - AVRISP (Arduino ISP)* - USBasp (AVR ISP)* - USBTiny (AVR Pocket)* Auto-flash enabled* Auto-flash disabled* Auto-flash enabledUSB device disconnected (CH341SER_A64): wch.cn USB-SERIAL CH340 (COM15) (1A86:7523:0264)USB device connected (CH341SER_A64): wch.cn USB-SERIAL CH340 (COM15) (1A86:7523:0264)

* - Atmel SAM-BA (Massdrop) via Massdrop Loader (https://github.com/massdrop/mdloader)

They have a newer release that has a integrated applet file, iirc. Are you using this version? https://github.com/Massdrop/mdloader/releases/tag/1.0.6

*** QMK Toolbox 0.1.1 (https://qmk.fm/toolbox) Supported bootloaders: - ARM DFU (APM32, Kiibohd, STM32, STM32duino) via dfu-util (http://dfu-util.sourceforge.net/) - Atmel/LUFA/QMK DFU via dfu-programmer (http://dfu-programmer.github.io/) - Atmel SAM-BA (Massdrop) via Massdrop Loader (https://github.com/massdrop/mdloader) - BootloadHID (Atmel, PS2AVRGB) via bootloadHID (https://www.obdev.at/products/vusb/bootloadhid.html) - Caterina (Arduino, Pro Micro) via avrdude (http://nongnu.org/avrdude/) - HalfKay (Teensy, Ergodox EZ) via Teensy Loader (https://pjrc.com/teensy/loader_cli.html) - LUFA Mass Storage Supported ISP flashers: - AVRISP (Arduino ISP) - USBasp (AVR ISP) - USBTiny (AVR Pocket) *** Atmel DFU device connected (libusb0): Atmel Corp. ATmega32U4 (03EB:2FF4:0000) *** Attempting to flash, please don't remove device >>> dfu-programmer.exe atmega32u4 erase --force Erasing flash... Success Checking memory from 0x0 to 0x6FFF... Empty. >>> dfu-programmer.exe atmega32u4 flash --force "C:\Users\****\Downloads\dz60_dz60_layout_mine (3).hex" 0% 100% Programming 0x5880 bytes... >>> dfu-programmer.exe atmega32u4 reset [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success 0% 100% Reading 0x7000 bytes... [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success Validating... Success 0x5880 bytes written into 0x7000 bytes memory (79.02%). *** Atmel DFU device disconnected (libusb0): Atmel Corp. ATmega32U4 (03EB:2FF4:0000)

looks good to me. windows even marked them as binary file. They are not made for you to open them, but upload in special program (mdloader i guess). Just read unstructions from here https://github.com/Massdrop/mdloader

*** QMK Toolbox 0.0.21 (https://qmk.fm/toolbox) Supported bootloaders: - Atmel/LUFA/QMK DFU via dfu-programmer (http://dfu-programmer.github.io/) - Caterina (Arduino, Pro Micro) via avrdude (http://nongnu.org/avrdude/) - Halfkay (Teensy, Ergodox EZ) via Teensy Loader (https://pjrc.com/teensy/loader_cli.html) - ARM DFU (STM32, APM32, Kiibohd, STM32duino) via dfu-util (http://dfu-util.sourceforge.net/) - Atmel SAM-BA (Massdrop) via Massdrop Loader (https://github.com/massdrop/mdloader) - BootloadHID (Atmel, PS2AVRGB) via bootloadHID (https://www.obdev.at/products/vusb/bootloadhid.html) Supported ISP flashers: - USBTiny (AVR Pocket) - AVRISP (Arduino ISP) - USBasp (AVR ISP) ! There are no devices available

Ok, I found something that I'll try: https://github.com/Massdrop/mdloader/releases

- Atmel SAM-BA (Massdrop) via Massdrop Loader (https://github.com/massdrop/mdloader)

This one worked for me: https://github.com/Massdrop/mdloader/releases (just replace the mdloader and applet files)

Flashing custom firmware - the current version QMK tool off the website won't work. You'll most likely get a "USB device connected (NO DRIVER): WB Device in DFU Mode " and not be able to flash anything. You will need the beta version that supports WB32 flashing utility. I grabbed mine from the GMMK guide QMK tool from GMMK

You first have to download QMK toolbox https://github.com/qmk/qmk_toolbox/releases/download/0.2.2/qmk_toolbox.exe. Once downloaded, download this bin file https://github.com/GHv4/Sense75-CAPSLOCK-UNDERGLOW/blob/main/sense75-CAPSLOCK%20UNDERGLOW.bin. Open the QMK toolbox exe file, then hit the open button. Locate the .bin file. Hold Right FN+BACKSPACE until it pops up in QMK Toolbox. Hit flash and wait for it to finish flashing. Via and Vial compatible. YOU'RE WELCOME FRIENDS!!

Flash it with qmk toolbox: https://github.com/qmk/qmk_toolbox/releases

I got things working by using the https://github.com/qmk/qmk_toolbox project, and the firmware file you linked. As you said, my pad now works with Vial, and has 12 layers. Though the layer selector still only traverses between layers 0 through 3.

- QMK MSYS: you'll need it for many things, for compiling your firmware file and for flashing, especially if flashing with QMK Toolbox isn't permitted in firmware settings (in this case QMK Toolbox just won't recognize your keyboard);

I am currently using the QMK online configurator tool to do the compilation and download the resulting .bin file, and then the QMK Toolbox to flash it onto the keyboard.

Check out this site: http://kpchn.com/s/PoHJ. I found it from the AliExpress page and it leads to all the VIA/VIAL configs for the KPRepublic boards. Go into CSTC75 and you'll see a .hex file, that's the firmware. You should be able to use the QMK toolbox: https://github.com/qmk/qmk_toolbox to flash the firmware.

Tool needed to flash your keyboard (QMK Toolbox) can be downloaded here: https://github.com/qmk/qmk_toolbox/releases/tag/0.2.2

When I first plugged them in, my Mac (running 13.1 Ventura) recognized them as a USB storage device. I was trying to use the QMK toolbox to flash the firmware onto them, not realizing that I needed to drag and drop a .uf2 file instead of trying to flash a .hex file.