keycap_playground VS void_switch

The script that generated these keycaps is also there but you'll probably need to modify it a bit for it to work in your environment: https://github.com/riskable/keycap_playground/blob/master/scripts/gem_full.py

I made a 3D printed keyboard with 3D printed switches + stabilizers and sent it to Chyrosran22 for review.

Longer story: Chyros suggested about 5 months ago that I make an "ultra bright" RGB LED keyboard that used my 3D printable Void Switch design (https://github.com/riskable/void_switch) so he could do a fun "RGB" video. I designed the PCB, the case, the top plate, switches, stabilizers, rotary encoders, etc from scratch and the keyboard in the video is the result.

The keyboard hardware was actually done within the first 3 months but I needed some extra time to add lighting effects to the firmware to meet the "fancy RGB" requirement :)

It's actually my 2nd normal-size analog keyboard design. The first being my Riskeyboard 70 which used a MAX7219 LED matrix display and regular (non-XL) ws2812b RGB LEDs: https://gfycat.com/firsthanduniformeasteuropeanshepherd

Not shown in his video: The top plates have no electronics in them which means they're completely waterproof and can be washed in a sink with soap & water: https://gfycat.com/unconsciousvigilantkinglet . Also, the incremental rotary encoder and absolute rotary encoder (aka "the selection knob") are analog as well (using a custom design).

The keycaps were 3D printed as well and designed using my Keycap Playground: https://github.com/riskable/keycap_playground

I wrote a script that generates entire sets of keycaps using my Keycap Playground: https://github.com/riskable/keycap_playground

Also note that split Cherry MX stem in KeyV2 is very fragile no matter what style of printing you use. I've had nothing but trouble with that which is why I developed my own stem types in the Keycap Playground: https://github.com/riskable/keycap_playground

I just made them with the Keycap Playground (https://github.com/riskable/keycap_playground) and printed them with the default orientation (on their side). I didn't even use the "Side Supports" feature. They fit great 👍

> I wish the customization options and custom keycaps, etc. would trickle to down to the non-mechanical market.

Just get a 3D printer and all your cheap, completely custom keycap desires will be answered...

https://github.com/riskable/keycap_playground

I'm typing on Keycap Playground keycaps right now:

https://gfycat.com/costlyglaringhyracotherium

Also, that gif is of my completely custom analog hall effect keyboard that uses 3D printed Void Switches which you can also customize to your heart's delight:

https://github.com/riskable/void_switch

(Make them feel however you like since the design is parametric and you can customize the feel by changing the total travel, distance between the magnets at rest, etc)

For reference, I'm spending most of my time working on the firmware so that I can start selling some (though "the plan" is mostly surrounding selling PCBs/kits and "print it your damned self!" hehe). Here's the numpad I've been working on lately (to develop the firmware):

https://gfycat.com/softfixedfanworms

As far as I know the "other times this has been tried" all have had individual displays (and controllers) in each key. The difference being that here there is just one panel under the whole board with most of the parts above the display being transparent. This approach should be far less complicated to build, more robust and cheaper.

Honestly, I don't think I need an LCD in my keyboard but I'd quite like to have a go on some mAgLeV hall effect switches! On that note, if you like magnets and/or keebs you might be interested in Void switches[0] -- 3D printable hall effect switches

[0] https://github.com/riskable/void_switch

I made a 3D printed keyboard with 3D printed switches + stabilizers and sent it to Chyrosran22 for review.

Longer story: Chyros suggested about 5 months ago that I make an "ultra bright" RGB LED keyboard that used my 3D printable Void Switch design (https://github.com/riskable/void_switch) so he could do a fun "RGB" video. I designed the PCB, the case, the top plate, switches, stabilizers, rotary encoders, etc from scratch and the keyboard in the video is the result.

The keyboard hardware was actually done within the first 3 months but I needed some extra time to add lighting effects to the firmware to meet the "fancy RGB" requirement :)

It's actually my 2nd normal-size analog keyboard design. The first being my Riskeyboard 70 which used a MAX7219 LED matrix display and regular (non-XL) ws2812b RGB LEDs: https://gfycat.com/firsthanduniformeasteuropeanshepherd

Not shown in his video: The top plates have no electronics in them which means they're completely waterproof and can be washed in a sink with soap & water: https://gfycat.com/unconsciousvigilantkinglet . Also, the incremental rotary encoder and absolute rotary encoder (aka "the selection knob") are analog as well (using a custom design).

The keycaps were 3D printed as well and designed using my Keycap Playground: https://github.com/riskable/keycap_playground

Haha... So I can use my awesome contactless magnetic separation+levitation 3D printable Void Switch design of course:

https://github.com/riskable/void_switch

...and so I can do this:

https://gfycat.com/costlyglaringhyracotherium

..and this:

https://gfycat.com/unconsciousvigilantkinglet

You can clean it in the sink with soap and water because there's no electrical contacts or components in the switches.

... But that's really just scratching the surface of what it can do.

Answering myself: the void switches by riskable can be used as analogic switches. It's an open source project: https://github.com/riskable/void_switch

If you wanted to try to do something DIY you could build something with riskable's void switch and adapt his firmware to do this. Since hall effect sensors are analogue, you program the set and reset point and can set multiple. Although, I do wonder how easy it is to reliably use this feature, but that's the fun in experimentation.

> "Instead of developing, manufacturing and keeping physical buttons in stock for years to come, car manufacturers are keen on integrating more functions into a digital screen which can be updated over time."

That's lame. 3D printing buttons is a very quick and simple solution to that problem. They can even use my lasts-forever, contactless analog hall effect Void Switch design: https://github.com/riskable/void_switch

Keeping buttons--something that's so quick and easy to 3D print--in stock seems like a huge waste of storage space.

Maybe these?