keyboard-pcbs VS qmk_firmware

In the repo for the royals there is a folder called 'gerber' which contains the files...

For the Amoeba Royal, first clone the repo: https://github.com/mtl/keyboard-pcbs/tree/master/amoeba-royale, then zip up the gerber folder and upload it to your PCB manufacturer of choice. I used jlcpcb and you can find the settings I used here: . Note that I ordered 5 panels of 10x5 pieces, so I ended up with 250 pieces. You may want to adjust accordingly. Btw the pinout reference for wiring is also in the same directory.

You can get the gerber files from This repo and get them really cheap from jlcpcb or other pcb services.

The thumbs are the "famous" github

They look like an Amoeba 1.5.

Or search for https://github.com/mtl/keyboard-pcbs or amoeba king or

For the software side, do you mean writing firmware for a pcb in general, or all the fingerpunch features added on to QMK? (See this: https://github.com/sadekbaroudi/qmk_firmware/tree/develop_fingerpunch/keyboards/fingerpunch/README.md )

sweeeeep doesn't have community layout support enabled, but you can do it with some small edits: Add LAYOUTS = split_3x5_3 to https://github.com/sadekbaroudi/qmk_firmware/blob/master/keyboards/fingerpunch/sweeeeep/rules.mk and add #define LAYOUT_split_3x5_3 LAYOUT_sweeeeep to

See my keymap: https://github.com/sadekbaroudi/qmk_firmware/blob/master/users/sadekbaroudi/wrappers.h https://github.com/sadekbaroudi/qmk_firmware/blob/master/keyboards/crkbd/keymaps/sadekbaroudi/keymap.c