intel-undervolt VS ddcutil

10th gen is locked by "Overclocking lock" And "Cfg lock" in bios, you can disable it thru ifr and use any software to undervolt your cpu (throttlestop on windows, linux has its own software (this, probably)). This is a lot safer than just putting voltages in bios as you can guess.

On Windows machines and laptops with Intel cpus, I almost always use Throttlestop to tweak power consumption and thus temperatures. I'd like to do so on this machine as well. I've found this: https://github.com/kitsunyan/intel-undervolt

intel-undervolt - though I may not be using this optimally. CPU: -75, GPU: -50, CPU-Cache: -75

You can use intel-undervolt to modify the voltage, TDP.

I will try your suggestion about limiting power package. I've been using this 3rd party intel-undervolt software, which I'm not sure if it supports granular changes to wattage, but it seems like there is some energy/performance settings there.

I personally use intel-undervolt and auto-cpufreq.

You can also undervolt though software on Linux based OS's. For intel there's these: https://github.com/georgewhewell/undervolt (this one looks more popular) https://github.com/kitsunyan/intel-undervolt (this is the one I use, no particular reason)

intel-undervolt also works fine for Intel laptops (I've used this successfully with my 11th gen H laptop).

Apologies. I hate when people do that as well.

In addition to the other links posted, ddcutil.org has some more good info: https://www.ddcutil.com/#introduction

Sous Linux j'avais utilisé ddcutil

Most monitors have a Virtual Control Panel (VCP), which implements features defined in the Monitor Control Command Set (MCCS). This is a VESA standard. You can find the Input selection command in table 8-10. You send these commands over an I2C bus called Display Data Channel/Command Interface which is yet another VESA standard. If you are running Windows https://www.nirsoft.net/utils/control_my_monitor.html will let you use every VCP feature your monitor has. For Linux, https://www.ddcutil.com/ does this. For Mac, https://github.com/alin23/Lunar

The protocol is called DDC , it's a VESA standard. In there, it's called VCP features. If you are running Windows https://www.nirsoft.net/utils/control_my_monitor.html will let you use every VCP feature your monitor has. For Linux, https://www.ddcutil.com/ does this. For Mac, https://github.com/alin23/Lunar note how all three mention input selection.

ddcutil (a command-line tool, and what most UI tools are based on)

A related non rust tool (that also has an optional GUI) is ddcutil. How does this compare to that?

I've also used ddcui: https://www.ddcutil.com/#introduction, available as an AUR package: https://github.com/rockowitz/ddcutil. This has a nice GUI: https://www.ddcutil.com/screenshots/ddcui_features.png and works on everything I've tried it on out of the box.