hekate VS sys-clk-uncapped-gpu-and-other-extras

I have a v1 unpatched Switch. I'd like to start the process of installing custom firmware. I read this note about being careful to make sure Atmosphere and Hekate support the latest firmware before updating, which they both seem to. But there's also something about gamecard firmware?

Make sure you have most update files from the main repo GitHub. https://github.com/CTCaer/hekate/releases. Follow the update instructions

Atmosphere : Atmosphere 1.5.4 (pre-release) Hekate : v6.0.4 & Nyx v1.5.3 Sigpatches : sigmapatches.coomer.party or hackintendo.com

I've installed modchip on Lite. It shows the "no sd card" logo. I've tried both hekate official gitthub and HATS packages loaded into an SD card, but it gives a black screen. It returns to no sd card when I press the power button for 10 seconds after removing the sd card.

Download Hekate 6.0.4 from the Github Page: https://github.com/CTCaer/hekate/releases/tag/v6.0.4 And move the extracted ZIP Contents to the Root of your SD Card.

Hekate 6.0.4 is out, get it: https://github.com/CTCaer/hekate/releases/tag/v6.0.4Also make sure you update AMS to 1.5.3: https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.5.3

- (Re)Initialize Switch from OFW (16.0.3) without any online (Nintendo) account - Turn off Updates in OFW (Auto-Update Software: Off) - Format mSD card (FAT32; 32k) using PC - Copy homebrew files to mSD card: ---- Hekate (https://github.com/CTCaer/hekate/releases/tag/v6.0.4), ---- Atmosphere (https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.5.3), ---- Sigpatches (https://sigmapatches.coomer.party/), ---- fusee.bin: /bootloader/payloads/ (https://github.com/CTCaer/hekate/releases/tag/v6.0.4), ---- hekate_ipl.ini: /bootloader/ (https://rentry.org/EristaEmuNAND), ---- exosphere.ini: / (https://rentry.org/EristaEmuNAND), ---- default.txt: /atmosphere/hosts/ (https://rentry.org/EristaEmuNAND) - Insert mSD card into Switch - Use RCM jig to boot into RCM - Tools > Partition SD Card - Home > emuMMC > Create emuMMC > SD Partition > Part 1 - Change emuMMC > SD RAW 1 - Rebot Switch into Hekate - Launch Atmosphere CFW: Verify version: 16.0.3|AMS 1.5.3|E

I went through and updated all my modules since 16.0.2 broke stuff. I found a new fork of sys-clock that actually allows the auto boost up to 1728mhz CPU during loading screens, pretty nice. https://github.com/jope82/sys-clk-uncapped-gpu-and-other-extras/releases

So I heard that there is a fork of sys-clk that has some updated features, one of which is auto-throttling/governor to save on battery. Is this the right one? https://github.com/jope82/sys-clk-uncapped-gpu-and-other-extras/releases

Add these files to the root of your SD card https://github.com/jope82/sys-clk-uncapped-gpu-and-other-extras/releases/download/1.0.2_c/sys-clk-1.0.2_c-uncapped-gpu-and-other-extras.zip

16.0.0 is definitely still overclockable since last week: https://github.com/jope82/sys-clk-uncapped-gpu-and-other-extras/releases

Hi, all i found a video(i guess the only one with the RAM overclock guide) and did all as shown, tried to edit latest kpi's with the 1996Mhz(for the range, cause it's by default contain 1996 overclock), but still i don't see it in sys-clk(i can choose only 1600Mhz, the same with CPU, max 1785 despite my fix in config). Maybe i'm doing something wrong? Can someone help me to understand that? Thanks. Here is the software that i'm using https://github.com/jope82/sys-clk-uncapped-gpu-and-other-extras https://github.com/KazushiMe/Switch-OC-Suite/tree/c2a302c8b71d8ab06db84533a8f5cd511f01ae27