esp-open-sdk VS MicroPython

RUN cd /home/builder && tar -xzf xtensa-lx106-elf-gcc8_4_0-esp-2020r3-linux-amd64.tar.gz WORKDIR /root RUN pip3 install rshell esptool USER builder WORKDIR /home/builder RUN git clone --recursive https://github.com/pfalcon/esp-open-sdk.git RUN rm -rf ~/esp-open-sdk/crosstool-NG RUN cd ./esp-open-sdk && git clone https://github.com/jcmvbkbc/crosstool-NG RUN cd ./esp-open-sdk/crosstool-NG && git checkout xtensa-1.22.x RUN cd ./esp-open-sdk/crosstool-NG && autoconf && ./configure && make && CT_EXPAT_VERSION="2.4.1" ENV PATH=/home/builder/xtensa-lx106-elf/bin/:$PATH RUN git clone https://github.com/micropython/micropython.git RUN cd ~/micropython && git submodule update --init && make -C mpy-cross

git clone --recursive https://github.com/pfalcon/esp-open-sdk.git cd esp-open-sdk/ rm -rf crosstool-NG git clone https://github.com/jcmvbkbc/crosstool-NG cd crosstool-NG git checkout xtensa-1.22.x perl -p -i~ -e 's/\$\{CT_EXPAT_VERSION\}/2.4.1/g' scripts/build/companion_libs/210-expat.sh cd .. make STANDALONE=y echo "PATH=$(pwd)/xtensa-lx106-elf/bin:\$PATH" >> ~/.profile source ~/.profile rm $(pwd)/xtensa-lx106-elf/bin/esptool.py sudo pip3 install esptool.py

Just putting my hand up to say that MicroPython is awesome (and runs on the RP2040). https://micropython.org

Gah, I just ordered one on impulse [1]. I've wanted to build out a WiFi PDA for quite some time now and I like this hardware.

I'm quite liking the idea of running tulip MicroPython [2] on it, or going back to pure MicroPython [3] and writing some drivers. Apparently something like ampy can be used to upload/download Python files [4].

Threads could be quite exciting for running multiple programs at once [5], although I have no idea what it means for two programs to fight over GPIO! It does seem as though MicroPython can only utilise a single core [6].

[1] https://www.lilygo.cc/products/t-deck?variant=43087936487605

[2] https://github.com/bwhitman/tulipcc/tree/main/tulip/tdeck

[3] https://docs.micropython.org/en/latest/esp32/tutorial/intro....

[4] https://www.digikey.co.uk/en/maker/projects/micropython-basi...

[5] https://docs.micropython.org/en/latest/library/_thread.html

[6] https://github.com/micropython/micropython/issues/8197

If you really want to engage in the travesty that is shoehorning a high level scripting language into an environment that has 512 bytes of RAM and less clock cycles than an electric toothbrush, there is micropython.

There is some work to implement a common CAN interface in micropython but it's some way off yet: https://github.com/micropython/micropython/pull/13149

https://github.com/raspberrypi/pico-sdk/ links to a PDF about connecting to the interwebs with a pi pico.

micropython/micropython//ports/rp2/boards/RPI_PICO_W: https://github.com/micropython/micropython/tree/master/ports...

raspberrypi/pico-sdk /lib: btstack, cyw43-driver, lwip, mbedtls, tinyusb https://github.com/raspberrypi/pico-sdk/tree/master/lib

raspberrypi/pico-examples//pico_w/wifi/access_point/picow_access_point.c:

https://github.com/raspberrypi/pico-examples/blob/master/pic...

There's an iperf opkg pkg, or is it just netperf (which works with fluent)?

raspberrypi/pico-examples//pico_w/wifi/iperf/picow_iperf.c:

Needed for hobby project, maintained by very small team. Haven't decided on specific microcontroller. Needed for general bit-banging, speed and code size are not priorities.

So far have considered MicroPython [0] [1] and Lua [2] [3], but open for suggestions for others.

What are experiences?

[0] https://micropython.org/

Python is also a general-purpose programming language. It's typically used on desktop / laptop computers. But Micropython is a variant that can be used to program embedded devices.