edk2 VS coreboot

For the modern server/desktop and even laptop, that's also no bad thing. It is somewhat ridiculous that UEFI bioses, internally, still boot in 16-bit real mode and have to do all the steps your bios bootloader used to do to set up a 64-bit environment ready to go: https://github.com/tianocore/edk2/blob/edc6681206c1a8791981a..., https://github.com/tianocore/edk2/blob/edc6681206c1a8791981a..., https://github.com/tianocore/edk2/blob/edc6681206c1a8791981a...

Why not just start the CPU in "long mode", which is what everyone is using it for, in the first place?

These newer ARM processors support 32-bit code at EL0 only (userspace). That seems like a reasonable approach for x86 as well and the freebsd announcement has this to say:

> There is currently no plan to remove support for 32-bit binaries on 64-bit kernels.

So for the moment, you can run 32-bit applications just fine.

Download this UEFI shell and place it in the BOOT subfolder

They could have at least informed TianoCore. the affected code in edk2 hasn't been modified in 2 years.... https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Library/BaseBmpSupportLib/BmpSupportLib.c

I have half fixed it.. Using this solution: https://github.com/tianocore/edk2/discussions/4662

You need only EDK2 and some lööps.

What is the difference between this and https://github.com/tianocore/edk2

From there you'll need to get an EFI Shell. There may be one built into your system, but you can also get one here from Tianocore (aka, the people mostly making UEFI). Neither this EFI Shell nor Keytool.efi (the thing you need to load the keys) are signed of course, so you will need to turn off SecureBoot to continue. From there just run Keytool with your new keys, turn back on SecureBoot, and move on with your life.

I had the same issue. What fixed it for me was compiling my own OVMF.fd file from here and using that to boot. The version of OVMF that shipped with fedora was broken for me for some reason.

Why BIOS (did you mean UEFI?) when it runs the best boot loader, which is Coreboot¹. Many users would love to re-flash their bios/uefi for it, if it’s supported.

1: https://www.coreboot.org/

Coreboot is 0.6% C++.

NovaCustom ; some models come with Dasharo a coreboot distribution.

You can also use Mr. Chromebox Script to install Coreboot on your chromebook to get a UEFI BIOS on your Chromebook and then you can go an install either a linux distro or even Windows if you want. It's a pretty straightforward process and also reversable if you want to go back to just using ChromeOS.

Some models are available with Dasharo a [coreboot]https://www.coreboot.org/) distribution.

why no haswell_ult_dmi_registers for broadwell? in https://github.com/coreboot/coreboot/blob/master/util/inteltool/pcie.c

use croshfirmware.sh from https://github.com/coreboot/coreboot/tree/master/util/chromeos

There may be other protections to restrict SPI flash access for security reasons (so you might not be able to flash your custom firmware in the OS), but worst case you can use a HW flasher (or maybe USB flashback). Still, this doesn't address the elephant in the room - platform initialization code might be open-sourced, but that isn't everything. You'll still need to figure out the board-specific stuff (the Super I/O chip, chipset GPIOs, other peripherals, etc.). Using coreboot as an example, Intel provides the Firmware Support Package blob to handle platform initialization. I think AGESA is somewhat similar to this, though Intel publicly releases the binaries for use in coreboot/etc. Thanks to the FSP, coreboot has support for recent Intel chipsets. However, there is only support for two recent consumer boards: the MSI PRO Z690-A WiFi DDR4 and DDR5.

does anyone know what is https://github.com/coreboot/coreboot/blob/b12caef23bc1b29c2e658f2b728cc4beac1e62b9/src/northbridge/intel/haswell/vcu_mailbox.c

Download crosfirmware.sh and run it from command line: bash crosfirmware.sh droid