crkbd VS scad-keyboard-cases

Looks at the order here : https://github.com/foostan/crkbd/issues/96

I followed this guide for the build (https://github.com/foostan/crkbd/blob/main/corne-classic/doc/buildguide_en.md)

Not sure which information you mean, but here goes. Nice!Nano v2 Pinout (shows Arduino pin mapping). Nice!View Getting Started (explains how to remap the CS pin for a non-native shield like Corne). The overlay file where "cs-gpios" is set for the nice_view_adapter in ZMK. If you look at the Corne Schematic, you'll see as shown in the labels in this image that the bottom two pins (B2, B4, B5, B6) don't appear to be used for a column, row, or the OLED header. But the only way to really verify is to pull the KiCAD file for your Corne version and check yourself. I think D0 ("Data") should work. It appears to go to an optional I2C connection.

Want to say the corne board drawings etc are available at https://github.com/foostan/crkbd as well, if you fancy learning kicad you might be able to tweak them yourself ... though that is definitely the deep end of things...

https://youtu.be/-E7KRnVCjq8 https://youtu.be/4bB9A1YYyII https://github.com/foostan/crkbd/blob/main/corne-cherry/doc/v3/buildguide_en.md

For the layout, I took inspiration from the CRKBD and the Boardsource's Microdox.

This is the numbered LED series from the Corne Classic Build Guide (https://github.com/foostan/crkbd/blob/main/corne-classic/doc/buildguide_en.md)

I would need hex file from here https://github.com/foostan/crkbd/blob/main/doc/firmware_en.md and then i need to run flash command . Il read through it one more time, it seems that i use same hex file for both sides.

STLs and the OpenSCAD code are available at https://github.com/Lenbok/scad-keyboard-cases/tree/master/humla (essentially all you need to do to adapt for a different laptop is to create a KLE layout for the laptop and suck that json in as described in the README in my repo).

Mostly used SCAD files and tips from https://github.com/Lenbok/scad-keyboard-cases. Thanks BTW, this is awesome! Just adapted them to fit my RJ11 connectors and metal inserts.

If you are feeling diy you could go the route I did and make caps out of oogoo. https://github.com/Lenbok/scad-keyboard-cases/tree/master/misc

• Case - [Redox-rev0b github](https://github.com/Lenbok/scad-keyboard-cases/tree/master/redox-rev0b) • Switches - [Gateron Silent Yellows](https://1upkeyboards.com/shop/switches/set-packs/gateron-silent-switches/) \[Lubed with 205g0\] • Diodes - [1N4148 - Amazon](https://smile.amazon.com/gp/product/B06XB1R2NK/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1) • Controllers - [1up Keyboards Pro Micro](https://1upkeyboards.com/shop/controllers/pro-micro/) • TRRS Jack - [Amazon Link](https://smile.amazon.com/gp/product/B06XG3YTC4/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1) • TRRS Cable - [Amazon Link](https://smile.amazon.com/gp/product/B083LLWXBW/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&th=1) • Micro USB to USB-C - [Amazon Link](https://smile.amazon.com/gp/product/B07VBV1PY5/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1) • Alpha Keycaps - [PBT DSA 9009 Kbdfans](https://kbdfans.com/products/npkc-dsa-9009-pbt-keycaps) • Mod Keycaps -[KeyV2 github](https://github.com/rsheldiii/KeyV2) • Silicone Adhesive Sheet - [Amazon Link](https://smile.amazon.com/dp/B07GL9MHW7?psc=1&ref=ppx_yo2_dt_b_product_details) • Magnetic USB Cable - [Amazon Link](https://smile.amazon.com/gp/product/B07LBG1DFQ/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1) • Filament - [Overture Matte Black](https://smile.amazon.com/OVERTURE-Filament-Printer-Dimensional-Accuracy/dp/B089S2QDHD/ref=sxts_rp_s1_0?cv_ct_cx=matte+black+pla&dchild=1&keywords=matte+black+pla&pd_rd_i=B089S2QDHD&pd_rd_r=5a309e43-2594-4c12-8c3c-e9ea984663c0&pd_rd_w=C34LP&pd_rd_wg=hg7mU&pf_rd_p=c0fa563a-b0ba-455a-bd65-7b14bea6288c&pf_rd_r=0JRCRWJWCM7KZ4TRJ83F&psc=1&qid=1631920202&sr=1-1-f0029781-b79b-4b60-9cb0-eeda4dea34d6)

Try the case at https://github.com/Lenbok/scad-keyboard-cases/tree/master/crkbd that lets you snap in the switches. You could solder in from the rear. The source is there if you wanted to mod for some support for the pro micro itself.