Mantis-Xol VS VoronUsers

its called XOL2 from Armchair-Engineering -> https://github.com/Armchair-Engineering/Mantis-Xol

Xol 2 by Armchair Engineering

The toolhead is a XOL2 https://github.com/Armchair-Engineering/Mantis-Xol using bambulab X1 hotend https://us.store.bambulab.com/products/hotend-with-hardened-steel-nozzle

You might want to look into the Mantis Xol 2 toolhead instead, it has about 1.5x the cooling of Stealthburner with 2x radial 4010s instead of 1x 5015. At the Rapido UHF’s max flow rate you will be cooling limited on SB. also SB has a 4010 not 4020 for hotend cooling btw.

There's a bunch of alternate toolheads including Xol2 which are solid upgrades or sidegrades: https://github.com/Armchair-Engineering/Mantis-Xol

I use thr XOL 2 from armchair engineering due to cooling requirements since the doom gets really hot. It’s a mod of mantis. My input shaper results are great but I don’t have a reference for any other toolhead on this frame. https://github.com/Armchair-Engineering/Mantis-Xol

Correct, I am going to be replacing my stealth burner, it looks pretty, but I want to go for a minimalist print head as I'd rather my actual prints look better when printing at high speed. I've been searching for designs to see if I can avoid designing my own and found this github repo: https://github.com/Armchair-Engineering/Mantis-Xol

270º Clamping Hinges

Hotend is a Triangle Labs CHC Pro. Extruder setup is a mixture of a couple 😅 -mod of Mantis Toolhead to mount on MGN9C

Stealth skirts by Maverick

Those are a duct remix of this design, it is not yet posted since I need to install my wires to make sure no changes are needed. It will probably be uploaded in the next week.

I'm running a Chainflex umbilical cable + a beacon probe USB cable along the prebowden. I'm thinking about running the Bowden guide to help, I'm not pinching anything when I home the printer, but I'm looking to keep everything up and out of the way. https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Galvanic/Bowden_Tube_Guide

Here is a good cfg to automate the fans

basically copied and pasted from here: VoronUsers/bedfans.cfg at master · VoronDesign/VoronUsers · GitHub with printer specific info bellow

Why don't you submit this to the vetted mods repository? https://github.com/voronDesign/voronusers

I swapped to these magnetic bottom panels and they are awesome!

I noticed that you mentioned being annoyed by the cable management (or lack of it) in the kit, which I think is probably not uncommon with many kits with some exceptions (LDO looks nice). That bothered me also, so I'm also working on something to help with cable management, which may also work with the Trident (a remix of these cable ducts).