ArduinoMKRVidor4000Tutorial VS esp8266_deauther

I recently picked up a couple of Arduino MKR Vidor 4000s to start playing around with FPGA programming. After looking at the tutorials on the Arduino site and a bunch of poking around, I was finally able to get things working. I wrote down a list of the steps that I used and some other information that I was able to glean into a GitHub project here https://github.com/BrentSeidel/ArduinoMKRVidor4000Tutorial It contains some very simple combinatorial logic in both Verilog and VHDL. Think of it as something like a "Hello World" program.

Hashcat Cracking WPA/WPA2 Spacehuhn's Deauther

While magnet won't work, for wifi cameras you can safely and remotely deauthorize them (well, them and every other device on that access point) - tech is cheap and easily available (we're talking about $3 worth of hardware). Wired cameras generally don't enjoy ESD on their Ethernet cable pins. You can easily provide them with some using a piezo clicker from a cheap lighter.

Could I use a pi pico w to create a wifi deauther, like this ESP8266 Deauther | ESP8266 Deauther

Upload this on the bord https://deauther.com/ and have fun.. i use it to kick my nephew alle the time 😆🤣

here is link to the code https://github.com/SpacehuhnTech/esp8266_deauther

I already have a pwnagotchi, it’s not what im looking for in this case. I’m thinking more a pico version of this GitHub

With that said, I went this route and used the deauther app that comes pre installed with the [REDACTED] firmware.