8812au-20210629 VS RTL88x2BU-Linux-Driver

I've been trying for a few hours now to install drivers for a rtl8812au based usb wifi adapter (Edimax-7822ULC/UTC) on a nanopi r6c running kernel version 5.10.110. Zero luck with both the manufacturer driver for ubuntu and with an open source one-size-fits-all (https://github.com/morrownr/8812au-20210629). When running the manual install for morrownr's open source driver, I'm getting this error:

Is this a non-standart kali vm? If yes and you are learning, never sudo apt update/upgrade unless specifically told by your instructor. The adapter works for me with the drivers and intructions on github link

I have a dongle with that chipset, used it couple of times, worked fine. The driver I used is from here https://github.com/morrownr/8812au-20210629

Unofficially, the chipset itself seems to be the Realtek RTL8812AU chipset, which does have community support up to the current 6.1 kernel, but latest tested on Fedora is 5.11. (it will probably work, but honestly it's still a gamble). The work seems to mostly spur from the AUR repository, which links here.

As seen in the picture, every other ping seems to be about one second long and every other somewhat it should be. Pinging directly my Router via WLAN. There are different drivers available for the RTL8812AU, currently using this one: github.com/morrownr/8812au-20210629. The same issue persists using other drivers available. Power saving settings for the adapter are turned off, no effect.

The driver is available on github.

git clone https://github.com/morrownr/8812au-20210629.git

I had to reinstall a newer version of my driver ---> https://github.com/morrownr/8812au-20210629/issues/67

First you will need to find out which version you have. Version one or two (this one) will need this driver. For version three (this one) you will need this driver.

I have been able to solve it, it was linked to the wifi antena's driver. It may not be the same situation as you, but just in case it may help: - I was using the rtl88x2bu-dkms-git driver (AUR package) - this driver seem to have issues after the latest kernel update (https://github.com/RinCat/RTL88x2BU-Linux-Driver/issues/219) - however, this driver was not needed anymore to make my antenna (TP-Link Archer T3U Plus) work, so as a workaround I just removed it. - I still encounter some issues (like may need to unplug/replug the antena at boot), but everything works again ^^

I have similar issues and even the poweroff button is same. You are on the wrong place with this. I have found working rtl88x2bu here https://github.com/RinCat/RTL88x2BU-Linux-Driver and it works until 6.2 kernel. Maybe it will work with your device. I am too lazy to read all of this now.

sudo apt update sudo apt install -y git linux-headers-generic dkms wget https://github.com/RinCat/RTL88x2BU-Linux-Driver/archive/master.zip unzip master.zip cd RTL88x2BU-Linux-Driver-master sudo make uninstall make clean make sudo make install sudo modprobe 88x2bu sudo reboot

I've been using rincat wi-fi 88x2bu driver for my TP-Link Archer usb wi-fi card. I found out that the 6.2 core will have that driver be default. After I updated everything I unistalled the rincat driver and wi-fi still works, but I'm not sure that I unistalled it correctly. How can I check that my wi-fi runs on the default driver?

sudo git clone "https://github.com/RinCat/RTL88x2BU-Linux-Driver.git" /usr/src/rtl88x2bu-git

GitHub - RinCat/RTL88x2BU-Linux-Driver: Realtek RTL88x2BU WiFi USB Driver for Linux

I'd genuinely just like to pay for something that offers decent performance, without waiting half an hour to download a couple of gigabytes of your files.. I'm running this driver for my Realtek Archer dongle.

The one from RinCat is the driver I use and it supports the latest kernels. I recommend compiling it with dkms, so you don't need to do it for every kernel update.