2-milk-build-guide VS miniMACRO5

build guide, for reference, shows a board that has space for all the pins, not just a few like mine has: https://github.com/Keycapsss/2-milk-build-guide

Here's a Build Guide, if you need any help with building or configuring you can message me on discord CapnJames95#1841 and I'll help you out.

The "Long Life Milk" is obviously taking great inspiration from the 2%, I modified the case and used a MiniMacro5 PCB inside, added Mill-Max sockets and VIA support for good measure. The case took longer than I care to admit.

It's all for a pretty involved costume (think serious cosplay costumes). The general idea is that I'll have a small keypad with a knob (probably this thing with 4 keys and 1 knob: https://github.com/LeafCutterLabs/miniMACRO5) that sends keystrokes to an RPi, which in turn plays the sounds or manipulates the lights. The lights are mounted throughout the costume and the speaker is carried in a backpack and has it's own battery.

Minimacro5 is basically already the PCB you need! https://github.com/LeafCutterLabs/miniMACRO5

Here is the schematic: https://github.com/LeafCutterLabs/miniMACRO5/blob/master/hardware/schematic.pdf

I like it, this design supports 5x knobs https://github.com/LeafCutterLabs/miniMACRO5 All the files are there so you are free to modify or just make your own.

The gerber/eagle files are on the github so feel free to have your own made or modify it. https://github.com/LeafCutterLabs/miniMACRO5

Yeah, take a look at the GitHub, the designer sells them on Tindie or you can get the Pcb's made up yourself. I had a batch made up myself, grabbed the parts from several places and printed the cases myself.

The easiest is the atmega32u4 and you may want to start designing around a pro-micro. I designed the minimacro5 (https://github.com/LeafCutterLabs/miniMACRO5) and the eagle/gerber files are there feel free to mess around with it. Feel free to msg with any questions.