Zoneminder VS corectrl

I checked for open issues but it looks like just this one is open (still from 2021).

The best way to check it is to look at what video streams ZM can accept (www.zoneminder.com, "read the docs" section) and then reference the specs on your camera to see 1) if the camera supplies that kind of stream and 2) what the path URL for that stream is. That path URL is what you'd put into ZM when you configure the camera.

The above 3 Fixes https://github.com/ZoneMinder/zoneminder/security/advisories/GHSA-cfcx-v52x-jh74

Try this Github python script by DanielBorgesOliveira for sending videos from zoneminder to Telegram.

ZoneMinder

Found the function ZoneMinder uses code

Zoneminder - open source NVR system with an event server to use machine learning models to detect objects.

> I only want some decent fan control instead of relying on random scripts off github. AMD has to release some sort of GUI panel for sure.

Have you tried CoreCtrl [0]?

> My 5800x3D and 6800XT deliver an outstanding Linux gaming experience.

I have a 7900XTX and performance under Linux has been at least on par with Windows, sometimes better (though not by much).

> May i ask what driver features are you missing?

I'm not GP but I'd love to see frame gen and stuff like anti-lag and upscaling integrated into amdgpu with some sort of official way of setting it (though looking at Adrenaline it might actually be best if it's left up to the community to create the GUIs).

[0] https://gitlab.com/corectrl/corectrl

Basically the 7800 xt has this bug where I need to lower the core clock of -80mhz to avoid it crashing with 2 different hdmi/vga monitors or something. On windows no problems, but what about arch linux? How do I lower it? Looks like corectrl doesn´t support 7000 series gpus (from what I understood), please help yall!

sudo grub-mkconfig -o /boot/grub/grub.cfg Reboot your system. You should have more controls when you select Advanced as Performance mode. https://gitlab.com/corectrl/corectrl/-/wikis/Setup

> The AMD experience on Linux is vastly better than the Nvidia one.

I just wish we had an equivalent of AMD Software on Linux, so I could mess around with the settings more.

For example, I like to limit the GPU to 50-75% of it's total power for ambient heat/cooling reasons, or UPS/PSU/electricity bill reasons when specific games make it hard to cap framerates.

With AMD Software on Windows, it's no big deal. On Linux, the best I found was CoreCtrl: https://gitlab.com/corectrl/corectrl

Sadly, it doesn't seem to work all that well for my use case, which I mentioned in my blog post when using Linux instead of Windows as my daily driver at home too: https://blog.kronis.dev/articles/a-week-of-linux-instead-of-...

> You see, by default the card controls its own GPU and memory clock values, which means that when idle the GPU draws around 40 W of power. However, if I want to set a limit for how much W in total it can use, it also makes me set the GPU and memory clock values, which will them be fixed: so at idle the GPU will use about 60 W of power.

If you set it to POWER_SAVING instead of 3D_FULL_SCREEN, it uses the highest boost clock a lot less. Or if you use something like corectrl's application profiles (maybe the Windows vendor driver control panel has them?), you can selectively disable boost clock states in specific games.

I'm bias toward Asus motherboards. I have an "Asus TUF GAMING B550-PLUS WIFI II" and a "Asus ROG Crosshair VIII Hero (WI-FI) ATX". Both boards have a fan control feature in the BIOS/EFI. On the Windows side both boards come with Ai Suite 3 software. On the Linux side you might want to take a look at Corectrl ==> https://gitlab.com/corectrl/corectrl

I think CoreCtrl might offer some of what you're looking for.