wifi-cracking VS Wireless-USB-Big-Sur-Adapter

Perhaps this could be the solution to your problem. https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter .But in any case, I advise you to search the Internet for some information.

I have a tp-link archer t3u plus and I use this https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter

Your wifi card isn’t natively supported but if it happens to have a realtek chipset which is usually the case with TP-Link cards you might wanna try installing this driver. Otherwise, you can get a fenvi broadcom card for native support.

So i had a working Hackintosh made by a friend a long time ago (I have 0 knowledge about this stuff, but I do understand some basics). Later he upgrade some parts; Gigabyte Z390 mobo, some extra ram + Intel Core i7 9700K It worked like a charm but the wifi didn't work. Hence i always used it with lan cable. Now i moved and the lan socket there wasn't working. the pci network card inside never worked, so i thougth i just buy a ac1300 Tp usb adapater for wifi, instead of installing the drivers that people recommended using this usb dongle ( https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter) I ended up downloadin' the original one, And you guessed it, now my hackintosh doesnt boot, and it gives me this screen.

For the software you can look it up from here (https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter) and here (https://github.com/chris1111/D-LinkUtility-Package)

I've found this try if you have the V2

Have a look here. This is a driver to use Realtek chips on the latest versions of macOS. There's a list of working adapters on the page. Very likely this only works with Intel macs.

I tried using these instructions: https://github.com/chris1111/Wireless-USB-Big-Sur-Adapter. I would get through everything, but when I had to reboot to finalize the installation, it never worked.