v2-2566config VS A-better-print_start-macro

Klipper macros use parameters to pass arguments. Check out my print_start macro here for how it works: https://github.com/simplisticton/v2-2566config/blob/main/print_start.cfg -- as you can see, my macro accepts BED or BED_TEMP, EXTRUDER or EXTRUDER_TEMP, and MATERIAL as parameters which can be passed in from the slicer. Logical defaults are provided if the value isn't supplied. The reason it allows for X or X_TEMP is to make it compatible with an automated gcode generator script, so that's not relevant for everyone.

Take a look at my config. I have a temperature monitor routine that turns on fans in certain situations. https://github.com/simplisticton/v2-2566config

You can see my print_start (along with the rest of my config) here to get some ideas: https://github.com/simplisticton/v2-2566config

Hey, I've got the same sensor working correctly, you can see my config here: https://github.com/simplisticton/v2-2566config

Take a look at my print_start macro: https://github.com/simplisticton/v2-2566config/blob/main/print_start.cfg -- the line to include in the slicer is in the comment at the top.

Yes -- I wired a passive speaker to the 12864 display port (since I wasn't using it for anything else). Here's the config for the Octopus: https://github.com/simplisticton/v2-2566config/blob/main/beeper.cfg (one leg of the speaker is wired to EXP1_1, the other to GND).

Yes indeedy. If you want to see my config, it's in GitHub: https://github.com/simplisticton/v2-2566config but it's for a Voron 2.4 so I don't know how useful it'll be for you. It shows how I have things configured though, for inspiration.

If you want an example of how to manage macros with LEDs and a bunch of other plugins and custom stuff, take a look at my configs: https://github.com/simplisticton/v2-2566config. I'm not saying I did anything right or special, but my config does work :)

If you're interested, my config is posted to Github, feel free to take a look and ask questions: https://github.com/simplisticton/v2-2566config

You can check out my config at https://github.com/simplisticton/v2-2566config -- I don't use a slicer routine other than to call print_start.

The 2nd link is broken. I suspect you use New Reddit and New Reddit has a bug when creating links that have underscores in them. Here is the correct link: https://github.com/jontek2/A-better-print_start-macro

This print start macro is highly recommended for tap users

Grab and adjust this script, many in the Voron Discord uses this as their basis: https://github.com/jontek2/A-better-print_start-macro

You could also use a better print start macro.

I recommend using this

These are useful https://github.com/jontek2/A-better-print_start-macro, and https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging

https://ellis3dp.com/Print-Tuning-Guide/articles/troubleshooting/first_layer_squish_consistency_issues/z_offset_inconsistency.html#z-offset-inconsistency https://github.com/jontek2/A-better-print_start-macro

Your link didn't work this one does