obico-server VS MJPG-streamer

Have a look at Obico, formerly known as the Spaghetti Detective (or is it a fork? I don't know).

https://github.com/TheSpaghettiDetective/obico-server https://www.obico.io/docs/server-guides/configure-octoprint-plugin/

Obico can pause prints when it detects they've failed (via a camera). If you have Octoprint, you can install it as a plugin.

The Obico team has created the Orange Pi Zero 2 for OctoPrint software to provide a way to easily install OctoPrint. We have tested the software with over 100 users and we are now making it available to everyone.

I wouldn't say that. As soon as we can see a justifiable interest, we (the obico team) hope to deliver a board with an easily installable image for OctoPrint, ideally using the raspberry pi imager, within a month or so.

Actually I’m a team member at Obico and have no affiliation with bambu except that I bought their printer.

It’s Obico’sAi failure detection meter watching for print failures.

The Spaghetti Detective - Monitors my 3D printer for print failures and, if a failure is detected, my print is automatically stopped

2. https://github.com/jacksonliam/mjpg-streamer/

mjpg-streamer uses MMAL to access the Raspberry Pi Camera data, but that's not implemented on ARM 64-bit Linux.

cd ~ sudo apt-get install cmake libjpeg62-turbo-dev:armhf libjpeg62-turbo-dev imagemagick ffmpeg libv4l-dev cmake git clone https://github.com/jacksonliam/mjpg-streamer.git cd mjpg-streamer/mjpg-streamer-experimental export LD_LIBRARY_PATH=. make sudo make install

I think I was able to solve my own issue. I'm now using https://github.com/jacksonliam/mjpg-streamer to start a stream. It creates a minimal web interface at http://pi-address:8080/, and the path /?action=stream can be accessed from MotionEye.

I need to stream all three of them to a Windows computer, so the maximum bandwidth is about 100mbit. I have tried "motion", but the performance is abysmal. I get not more that one frame per second and the latency is 3s. I used https://github.com/jacksonliam/mjpg-streamer with one camera. Its super fluid with a latency of maybe 200ms, and full 30fps. But the stream takes 60mbit/s bandwidth so it is impossible to use all three cameras. I tried changing the jpg quality but mjpg-streamer crashes.

Thanks for your interest! I will opensource this project soon, but in case you want to start off now, here's some resources I used: - MJPG-Streamer https://github.com/jacksonliam/mjpg-streamer - .NET 6, targeting Linux (tutorial:) - dotnet package on linux - My custom designed case (beta!): Bottom part - Top part

Have you looked into mjpg-streamer (or other forks, this was the first Google result)