Sweep VS cantor

Adjacent: https://github.com/davidphilipbarr/Sweep

Sweep is a 34-key split PCB design that you can print and assemble yourself.

Happy user for over 3 years.

Please also consider Ferris Sweep: https://github.com/davidphilipbarr/Sweep

there is the sweep (https://github.com/davidphilipbarr/Sweep). Also there are some sweep variants with 36 keys (https://github.com/sadekbaroudi/sweep36)

Hi guys, still did unable to connect any of the slaves. Tried kmk but no luck as well. In the meanwhile i checked again continuity, which is working for all of the pins (in the TRRS) and also found the schematics for my board if that helps: https://github.com/davidphilipbarr/Sweep/blob/main/schematic.pdf

The ferris sweep has an mx spacing variant. [https://github.com/davidphilipbarr/Sweep]

DavidPhilipbarr / Sweep

ferris sweep

Personally I use ferris sweep and I just hold left thumb button to have arrows on right hand and I use them for neovim and helix. Nevertheless you should prioritize minimalising Same Finger Usage (SFI) and comfort, they are most important for speed and to minimize mistakes. Bare minimum, I would remap j to up and k do down, but you can also remap helix function of unei to places of hjkl and think for yourself how would you like to have them placed.

There are a few things that are close: * The Cantor/Piantor: more aggressive stagger and slightly changed thumb cluster. * The Swept Corne: essentially a big sweep. * The Hillside 46/48: This comes in many forms which are very similar to what you are looking for. Essentially an extra aggressive stagger (and perhaps splayed) Corne with a bigger thumb cluster.

Depending on how comfortable you are ordering PCBs yourself, the Cantor (https://github.com/diepala/cantor ) or the Cheapino (https://github.com/tompi/cheapino ) might be a good starting point for getting into split keyboards, both are diodeless, so you only need to solder the switches and use relatively cheap microcontrollers

The Corne caught my eye first, but I ended up starting with a Cantor, which has more stagger, like OP's keyboard. It didn't work for me. The Corne works better for me.

cantor

Cantor by DiePala, Choc, diodeless, cheap “Black pill” mcu, requires two. Caseless/plateless. Pcb is reversible, but you’ll need trrs cable and Jack.

I have 2 hand-wired keyboards with cherry style switches, and I decided to build a Cantor (diodeless, Corne-like with more pinky stagger) to try a PCB build and the Kailh choc v1 switches for a first time.

several of the low-profile / Choc boards (ex. Cantor) go the plateless and caseless route with nothing more than rubber bumpers on the bottom of the PCB

Cantor – low profile