Klipper-Adaptive-Meshing-Purging VS fluidd

Try KAMP: https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging/tree/main

2) I am trying to install KAMP which I have working, but again this does not surive a reboot because the Klipper-Adaptive-Meshing-Purging folder (in the root directory) is deleted each time.

As far as I know, the KAMP is configured correctly. The installation was successful, I've followed the steps from the Github page, but I'm fairly certain that I'm missing something from my START_PRINT macro that's keeping it from working.

gcode: # KAMP https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging EXCLUDE_OBJECT_DEFINE SETUP_KAMP_MESHING DISPLAY_PARAMETERS=1 BED_MESH_CALIBRATE

I combined KAMP (https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging) with the MAX_DEVIATION option to SCREWS_TILT_CALCULATE and now before every print my printer checks the bed screws, and if they are off by more than 0.05mm it aborts the print. It then does an adaptive bed mesh and then purge. All together it doesn’t usually add much time, and I’ve been getting consistently good first layers.

This is what I use for my adaptive purge (and mesh) - https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging

But then again, just TAP with KAMP is already fine enough for pretty much everyone.

That is the one I used to use for a long time until KAMP came around.

taken from here: Klipper-Adaptive-Meshing-Purging/Adaptive_Mesh.cfg at main · kyleisah/Klipper-Adaptive-Meshing-Purging · GitHub and bed mesh config is the standard config found here Secondary Printer Tuning | Voron Documentation (vorondesign.com) with the uncomments made for the 350 build

check out Fluidd

Perfect timing to thank to the team behind project Fluidd as well. After some time of inactivity, project has recovered and releasing regular updates, giving us awesome alternative the Mainsail UI.

That’s the fluidd logo in the top left

My recommendation if your just setting up: do yourself a huge favor and do not use OctoPrint. Instead I recommend using Mainsail of Fluidd. They’re both great web interfaces designed specifically for Klipper. Very fast, lightweight and take advantage of all available Klipper functions. Octoprint is very resource hungry.

In the past I used OctoPrint, but now I moved to Mainsail, because it has a better ui and some plugins are directly build in. You can install Kiauh and use it to install Mainsail or Fluidd next to OctoPrint.

You will need a raspberry pi, or an old laptop/pc that is x64. If raspberry pi, you can use either the mailsail or fluidd install image that will configure the entire ui and set up the basics for installing klipper. I’ll link to some videos that can help you if using a pi. Otherwise if using a desktop you will need to install Debian Linux and set up a user named pi and then use a project called kiauh which will allow you to configure mainsail or fluidd.

Personally I prefer Mainsail. But Fluidd is also popular.

Good catch! I've created an issue in GitHub and, once I get consensus on an approach, I'll look at fixing this