Getting-Started-With-ACPI VS USBMap

Got spoofing working, if you have a R9 290 or similar and have problems spoofing, do as explained here https://github.com/dortania/Getting-Started-With-ACPI/pull/71/files

It's a must though. Every PC is different, even 2 identical models might not have the same ACPI tables.. I would Start here.. There's only a few things you'll really need, especially on these machines. While there's many methods, a clean install of windows NOT booted through OpenCore, using SSDTime is the easiest for most.

Any log files? Debug?? Not enough info to give you any advice, except reading the guide and following it. Looks like possibly some SSDTs/ACPI files missing or wrong.

Question - Im assuming you're using one of those pre-builts you linked ,or parts of it. Did you make all your own ACPI/SSDT's, fix sleep, etc?? BIOS up to date? Why aren't you following the guide and making a config? .

SSDT-PLUG-DRTNIA

i have try everything here https://dortania.github.io/Getting-Started-With-ACPI/

read this

If you are stuck with using macOS only, they recommend USBMap anyway -> https://github.com/corpnewt/USBMap

Download Python, and USBMap from https://github.com/corpnewt/USBMap

iMessage and FaceTime works as well as all of my USB ports since I've mapped them manually with USBMap linked here https://github.com/corpnewt/USBMap.

Just confirming that you have built a USBMap.kext? Per this guide?

https://github.com/corpnewt/USBMap is a reference for how to map USB. You can also read here https://www.tonymacx86.com/threads/pastrychefs-asus-rog-strix-z370-g-gaming-wi-fi-ac-build-w-i9-9900k-amd-6600-xt.239969/ (search: map) for details on the fact that the motherboard's M2 slot uses an internal USB2 port. If it's not mapped, no USB, no BT.

Mapped using the Corpnewt guide linked from Dortania guide

Not sure where I'm going wrong - I've updated to the latest version of OpenCore and I'm running just fine on Catalina. There are a few threads similar to this that recommend USB mapping, so I tried that, using the USBMap/Readme. It hasn't seemed to make a difference, unless I screwed up somewhere, but all my ports currently work fine. I have yet to try USBInjectAll.kext, as I do not currently need that to boot and use my USBs in Catalina, but that will probably be my next step.

Then I cannot get my USB ports to work properly. I'm trying to map them with USBMap but they only seem to recognise USB3 devices and not USB2. I have a USB3 disk that I have plugged into everything and it shows up in USBMap and IORegestryExplorer, but when I do the same with my USB2 keyboard, it doesn't find it at all.

Also, use this to map your USBs: https://github.com/corpnewt/USBMap