BoxZero VS Voron

In the realm of unofficial mods, there is the Box Zero: https://github.com/zruncho3d/BoxZero

BoxZero

So I recently rebuilt the printer as a BoxZero with Tri-Zero and ZeroClick for automatic leveling bed, a sexbolt Z endstop for automatic Z offset on every print, and BTT EBB36 CAN to reduce the number of wires going to the toolhead to 4 wires. Now it prints like a dream, heats fast, and I never have to worry about my bed being level. It is far more reliable now than the stock V0.1 ever was.

If you're OK printing new skirts/feet then you can use the BoxZero mod ones and fit a WaveShare 4.3", which you could mod to fit the pitft50.

Anti-features like this just make me more convinced to get a Voron instead. Open source design, great community, almost infinitely moddable, and at least as capable as the Bambu. You can self-source all the parts or buy kits from various vendors.

https://vorondesign.com/

However, I say all this as someone that is technically inclined, wants to tinker, and is a fan of the open source. Somebody that wants plug-and-play should definitely look at another printer.

https://vorondesign.com/

"The original goal of the VORON project, back in 2015, was to create a no-compromise 3D printer that was fun to assemble and a joy to use. It had to be quiet, clean, pretty, and continue to operate 24 hours a day without requiring constant fiddling. In short a true home micro-manufacturing machine without a hefty price tag. It took over a year in development, with every part being redesigned, stress tested and optimized. Shortly after the release a vibrant community formed around the project and continues to grow today. This community is part of what makes VORON such a special experience.

What was once a one-person operation has grown into a small tight-knit group of engineers united under a common design ethos. We're dedicated to creating production-quality printers you can assemble in your kitchen. It's this passion and dedication that drive us to push the boundaries just a little further. We build space shuttles with gardening tools so anyone can have a space shuttle of their own.

Check out their website.

Check out https://vorondesign.com/

You can use the configurator at the site to try and find a size that could work. However, I must warn you that if those are V-slot extrusions you most likely won't be able to reuse them on a Voron: the slot is to wide to hold the MGN9 linear rails correctly.

Might check out their channel on the Voron discord (can find a link at vorondesign.com) and ask if anyone has any pictures.