Pico-vga-8bit-demo Alternatives

pico-vga-8bit-demo reviews and mentions

• Should you normalize RGB values by 255 or 256?
  1 project | news.ycombinator.com | 1 Jun 2026

  This problem of what exactly a color value means is mostly inconsequential when you have 8 bits per component, the difference in the denominator being either 255 or 256 makes the error tiny, and you must have really good color perception and get really close to the screen to see any difference at all, and your monitor/phone screen is probably not calibrated anyway, so who cares.

  It becomes a pain in the ass when you're generating a VGA signal with a microcontroller with 8 output pins (3 red, 3 green, 2 blue). The meaning of a color value is very real in this setup: it corresponds to a voltage level you must send to the VGA monitor, 0V-0.7V.

  So the blue channel will map (0->0V, 1->0.23V, 2->0.47V, 3->0.7V), and the red/green will map (0->0V, 1->0.1V, ..., 7->0.7V). Notice how none of the blue voltages match any of the red/green ones (other than the extremes)? That means you don't get to see any pure grays -- the closest ones will have bit of blue or yellow tint, depending on the direction of the error.

  Not only that, any gradients at all (other than the ones not mixing blue with the other channels) will be noticeable off: for example, the closest colors in the line between pure red to pure white will all be slightly orange or purple.

  Code for VGA output in 8-bit color with double-buffered 320x240 framebuffer for the Raspberry Pi Pico 2 here, if anyone cares: https://github.com/moefh/pico-vga-8bit-demo