gbs-control

By ramapcsx2

Gbs-control Alternatives

Similar projects and alternatives to gbs-control

NOTE: The number of mentions on this list indicates mentions on common posts plus user suggested alternatives. Hence, a higher number means a better gbs-control alternative or higher similarity.

gbs-control reviews and mentions

Posts with mentions or reviews of gbs-control. We have used some of these posts to build our list of alternatives and similar projects. The last one was on 2022-11-21.
  • Cheapest decent solution to connect/convert amiga 500+ scart signal to hdmi?
    1 project | /r/amiga | 9 Jun 2023
    I built a ESP8266 controlled GBS8200 as main scan converter. https://github.com/ramapcsx2/gbs-control You can get a GBS8200 for about 24$ + shipping and an ESP8266 doesn't cost much. And also it just needs basic solder skills. Not really complicated to build. Then you have a great VGA output. And that you can convert to HDMI with a cheap VGA-HDMI adapter. I personally use an old Eizo 5:4 VGA Monitor because of the aspect ratio but sometimes I do actually connect it to HDMI to record things in OBS.
  • Upscaling ITU BT.656 480i NTSC Video to SVGA 800x600
    1 project | /r/FPGA | 25 May 2023
    Try searching for GBS-CONTROL. You should probably start looking here: https://github.com/ramapcsx2/gbs-control
  • I just got this cruisn usa board from ebay and it seems to be giving an error code and no video. Anyone familiar with this?
    1 project | /r/arcade | 3 May 2023
    Some games also require you to move the sync signal over to the next pin, some games require sync signal to both pins at once. It can take some fiddling for a few games but I've always gotten it working eventually. It could help to also go ahead and upgrade the board with GBS control. I have my Rush setup that way and it's pretty handy being able to adjust the picture wirelessly with my phone.
  • Best N64 to HDMI converter?
    1 project | /r/n64 | 26 Mar 2023
    In my opinion GBS-Control. https://github.com/ramapcsx2/gbs-control
  • Can some one with experience with GBS Control give me a hand? I can’t access the web interface
    1 project | /r/retrogaming | 9 Mar 2023
    Try some of the other URLs after connecting to the local wifi. https://github.com/ramapcsx2/gbs-control/wiki/Software-Setup
  • Just got my GBSControl in! Best picture clarity I've seen out of the Saturn thus far using RGBS cables on a modern flat panel.
    1 project | /r/SegaSaturn | 24 Feb 2023
  • Best/Budget Friendly CGA converter.
    1 project | /r/retrobattlestations | 11 Feb 2023
    Arcade "CGA" isn't real CGA, it's just analog 15 kHz RGB. You'd have to use something like this to convert the CGA from your computer into analog RGB if you want to feed it into one of those GBS-8200 boards. They're not very good unless you modify them anyway. I use an OSSC to convert analog RGB to HDMI, but that's more expensive.
  • I build a GBS-Control to use with my new Saturn. It works great!
    1 project | /r/retrogaming | 28 Dec 2022
    After a bit of research, I almost pre-ordered a RAD2X HDMI cable, but that would likely be around $85 after shipping, and wouldn't get here for a while. Also, it only works with the Saturn, while I was hoping to find a solution that will work with other retro consoles. Luckily, I came across this video by Voultar showing how to build a GBS-Control.
  • Ps1 to pc monitor
    1 project | /r/psx | 22 Nov 2022
    If you know how to wield a soldering iron then a GBS-8200 plus gbs-control firmware does a good job too for a much lower price, but that does get pretty technical.
  • Ask HN: What weird technical scene are you fond/part of?
    25 projects | news.ycombinator.com | 21 Nov 2022
    - Sometimes the web UI won't have 1280x960 checked, even if it's outputting a 960p signal. I don't know if this is connected to the vertical shift bug, or if .

    Again I'd have to dig into the GBS-C source code to find out why mode changing behaves oddly. There will be a lot of learning to do, understand the software state and chip registers and how they correlate to profile settings and input/output behavior. I suppose I could file a bug at https://github.com/ramapcsx2/gbs-control/issues, but somehow I feel reluctant to do so, partly because I didn't fully understand the setup and don't know if many of these bugs wouldn't happen on a VGA CRT, partly just learned helplessness and not knowing if my bug report is detailed enough or will be ignored or attacked, partly because I'd prefer to chat with the developers in Discord/Matrix outside of a higher-stakes formal bug report or a forum I've never posted at before.

  • A note from our sponsor - WorkOS
    workos.com | 24 Apr 2024
    The APIs are flexible and easy-to-use, supporting authentication, user identity, and complex enterprise features like SSO and SCIM provisioning. Learn more →

Stats

Basic gbs-control repo stats
50
745
5.5
about 2 months ago

Sponsored
SaaSHub - Software Alternatives and Reviews
SaaSHub helps you find the best software and product alternatives
www.saashub.com