TMCStepper Alternatives

TMCStepper reviews and mentions

• TMC2209 stepper motor driver: Any functional Arduino Uno example ino (and pinout) for sensorless homing (using stallguard)? Figuring out the appropriate pinout for Arduino Uno when using TMCStepper and TMC2209 libraries has been a little challenging. Thanks in advance for answering soon!
  1 project | /r/arduino | 23 Jun 2023

  Now take a look at the header file of the library TMCStepper you want to use, https://github.com/teemuatlut/TMCStepper/blob/master/src/TMCStepper.h

• ALL LOW error message
  1 project | /r/BIGTREETECH | 26 Aug 2022

  (...) /** * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ //#define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ //#define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. * A list of available functions can be found on the library github page * https://github.com/teemuatlut/TMCStepper * * Example: * #define TMC_ADV() { \ * stepperX.diag0_otpw(1); \ * stepperY.intpol(0); \ * } */ #define TMC_ADV() { } Any thoughts?

• Run stepper motor silently over Wi-Fi
  1 project | /r/arduino | 9 Aug 2022

  My problem is that the library I'm using for the TMC2208 is made for the AVR architecture which means the ESP8266 seems to be incompatible with the code. I belive I have a few options.

• (Sound). What caused this? Fully updated board and screen. SKR Pro v1.2, TMC2208, TFT35E3 V3. Only during Touch mode bed calibration (Point1-5)
  2 projects | /r/BIGTREETECH | 25 Mar 2021

  * https://github.com/teemuatlut/TMCStepper

• ESP8266 and stepper driver : serial line interferences
  1 project | /r/esp8266 | 13 Mar 2021

  The library is called TMCStepper, and this issue suggests softwareserial cannot be used. I have tested it myself and can confirm this. Solution would be to get an ESP32 that has multiple hardware serial connections.

• This is my take on a smart curtain opener that easily retrofits onto any existing curtain rod
  1 project | /r/homeautomation | 24 Jan 2021

  I looked into the code and it turns out that TMCstepper makes use of basically 2 functions to write to the register (here lines 187 and 281), so should the example given above not work you have a second option !

• A note from our sponsor - SaaSHub
  www.saashub.com | 12 Aug 2026

  SaaSHub helps you find the best software and product alternatives Learn more →