The APIs are flexible and easy-to-use, supporting authentication, user identity, and complex enterprise features like SSO and SCIM provisioning. Learn more →
MiniCore Alternatives
Similar projects and alternatives to MiniCore
-
MightyCore
Arduino hardware package for ATmega1284, ATmega644, ATmega324, ATmega324PB, ATmega164, ATmega32, ATmega16 and ATmega8535
-
WorkOS
The modern identity platform for B2B SaaS. The APIs are flexible and easy-to-use, supporting authentication, user identity, and complex enterprise features like SSO and SCIM provisioning.
-
FastAccelStepper
A high speed stepper library for Atmega 168/328p (nano), Atmega32u4, Atmega 2560, ESP32, ESP32S2, ESP32S3, ESP32C3 and Atmel SAM Due
-
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
-
MegaCore
Arduino hardware package for ATmega64, ATmega128, ATmega165, ATmega169, ATmega325, ATmega329, ATmega640, ATmega645, ATmega649, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega3250, ATmega3290, ATmega6450, ATmega6490, AT90CAN32, AT90CAN64 and AT90CAN128
-
InfluxDB
Power Real-Time Data Analytics at Scale. Get real-time insights from all types of time series data with InfluxDB. Ingest, query, and analyze billions of data points in real-time with unbounded cardinality.
-
Bloom
A debug interface for AVR-based embedded systems development on GNU/Linux. (by bloombloombloom)
MiniCore reviews and mentions
- Barebone ATmega328 project at 8Mhz
-
Arduino Uno Bootloader flash Issues
I used MiniCore with some help from this ARTICLE and was able to flash my uno but encountered some more problems
-
definitive guide on programming the SMD ATmega328 or ATmega32u4?
Once you buy the programmer, install the drivers on your computer. Your Arduino IDE will also need the correct "boards" installed to program all the different microcontrollers. This is done through the "Boards Manager." Use the MiniCore GitHub page to install the Atmega328.
- Having trouble communicating with a CP2102 IC on a custom board. Simplicity Studio says it is not recognised properly even though it does show up. Tried replacing drivers with Zadig, no change. Perhaps the schematic is wrong?
-
ATMEGA328 16MHz flash to 8MHz (without crsytal)
I meant MiniCore
-
ATMEGA328PB-MU TWI Issue
To be on the safe side you may want to install a 3rd party "Arduino core" specific for this chip, in case some pinouts or constants were changed compared to to earlier ATmega328 chips. Google gave me this: https://github.com/MCUdude/MiniCore ; others may exist.
-
Burning a bootloader onto an ATmega328p.
If you do want to use the Arduino libraries and Arduino IDE as normal you need to install MCDude's MiniCore which is an implementation of Arduino that lets you work directly with the chips (i.e. the "board" in the Arduino IDE is the chip directly). In the link above you can find amongst others install instructions and the maps of the chip pins to Arduino pins (which you need to know which microcontroller pin corresponds to which Arduino pin number when you do things like digitalWrite).
-
Running ATMEGA328P at 27mhz?
You'd need to create your own board definition as the default install only handles 16MHz. MCUdude's MiniCore core shows how this could be done: https://github.com/MCUdude/MiniCore
-
A note from our sponsor - WorkOS
workos.com | 19 Apr 2024
Stats
MCUdude/MiniCore is an open source project licensed under GNU General Public License v3.0 or later which is an OSI approved license.
The primary programming language of MiniCore is C++.