Finally manage to solder a 64MB flash. Harder than I expected when one pin didn’t connect correctly. Anyway, have to start select games, any suggestion?

• game-and-watch-backup

  12 392 5.2 Shell

  Relatively easy to use scripts for backing up (and restoring) the original Game & Watch firmware.

  

I think you can search youtube for the tutorials, but don’t follow them exactly, because most of them do not quite know how to do soldering XD. If you have a hot air gun it will be much easier, but it is still doable with solder iron. I suggest you to desolder the speaker from the board and remove the board from the case before doing anything. You can test and flash the ROM without reconnecting the board to display. You can flash the ROM with a pi or st-link adapter. I’m using a st-link adapter and I suggest to do so. It is a lot more stable and faster than using pi. Here are all the useful links of software that I’ve used. Backup and Unlock the G&W, do it before any hardware mod https://github.com/ghidraninja/game-and-watch-backup Patch original game so launch retro-go with SET+Left https://github.com/BrianPugh/game-and-watch-patch Orignal Retrogo from G&W https://github.com/kbeckmann/game-and-watch-retro-go Forked version that support cover art (I’m using this) https://github.com/olderzeus/game-and-watch-retro-go Convert MAME G&W games to Retrogo, you can download G&W games from any MAME archive. And google “Game and watch artwork” for the artkworks, you should able to find a google drive sharing folder https://github.com/bzhxx/LCD-Game-Shrinker

• game-and-watch-patch

  13 131 7.4 C

  CFW for the Nintendo Game and Watch

I think you can search youtube for the tutorials, but don’t follow them exactly, because most of them do not quite know how to do soldering XD. If you have a hot air gun it will be much easier, but it is still doable with solder iron. I suggest you to desolder the speaker from the board and remove the board from the case before doing anything. You can test and flash the ROM without reconnecting the board to display. You can flash the ROM with a pi or st-link adapter. I’m using a st-link adapter and I suggest to do so. It is a lot more stable and faster than using pi. Here are all the useful links of software that I’ve used. Backup and Unlock the G&W, do it before any hardware mod https://github.com/ghidraninja/game-and-watch-backup Patch original game so launch retro-go with SET+Left https://github.com/BrianPugh/game-and-watch-patch Orignal Retrogo from G&W https://github.com/kbeckmann/game-and-watch-retro-go Forked version that support cover art (I’m using this) https://github.com/olderzeus/game-and-watch-retro-go Convert MAME G&W games to Retrogo, you can download G&W games from any MAME archive. And google “Game and watch artwork” for the artkworks, you should able to find a google drive sharing folder https://github.com/bzhxx/LCD-Game-Shrinker

• WorkOS

  workos.com sponsored

  The modern identity platform for B2B SaaS. The APIs are flexible and easy-to-use, supporting authentication, user identity, and complex enterprise features like SSO and SCIM provisioning.

  

• game-and-watch-retro-go

  11 424 0.9 C

  Discontinued Emulator collection for Nintendo® Game & Watch™

I think you can search youtube for the tutorials, but don’t follow them exactly, because most of them do not quite know how to do soldering XD. If you have a hot air gun it will be much easier, but it is still doable with solder iron. I suggest you to desolder the speaker from the board and remove the board from the case before doing anything. You can test and flash the ROM without reconnecting the board to display. You can flash the ROM with a pi or st-link adapter. I’m using a st-link adapter and I suggest to do so. It is a lot more stable and faster than using pi. Here are all the useful links of software that I’ve used. Backup and Unlock the G&W, do it before any hardware mod https://github.com/ghidraninja/game-and-watch-backup Patch original game so launch retro-go with SET+Left https://github.com/BrianPugh/game-and-watch-patch Orignal Retrogo from G&W https://github.com/kbeckmann/game-and-watch-retro-go Forked version that support cover art (I’m using this) https://github.com/olderzeus/game-and-watch-retro-go Convert MAME G&W games to Retrogo, you can download G&W games from any MAME archive. And google “Game and watch artwork” for the artkworks, you should able to find a google drive sharing folder https://github.com/bzhxx/LCD-Game-Shrinker

• game-and-watch-retro-go

  2 79 3.8 C

  Emulator collection for Nintendo® Game & Watch™ (by olderzeus)

I think you can search youtube for the tutorials, but don’t follow them exactly, because most of them do not quite know how to do soldering XD. If you have a hot air gun it will be much easier, but it is still doable with solder iron. I suggest you to desolder the speaker from the board and remove the board from the case before doing anything. You can test and flash the ROM without reconnecting the board to display. You can flash the ROM with a pi or st-link adapter. I’m using a st-link adapter and I suggest to do so. It is a lot more stable and faster than using pi. Here are all the useful links of software that I’ve used. Backup and Unlock the G&W, do it before any hardware mod https://github.com/ghidraninja/game-and-watch-backup Patch original game so launch retro-go with SET+Left https://github.com/BrianPugh/game-and-watch-patch Orignal Retrogo from G&W https://github.com/kbeckmann/game-and-watch-retro-go Forked version that support cover art (I’m using this) https://github.com/olderzeus/game-and-watch-retro-go Convert MAME G&W games to Retrogo, you can download G&W games from any MAME archive. And google “Game and watch artwork” for the artkworks, you should able to find a google drive sharing folder https://github.com/bzhxx/LCD-Game-Shrinker

• LCD-Game-Shrinker

  5 34 4.7 Python

  This program permits to shrink MAME high resolution artwork and graphics for portable device running LCD-Game-Emulator.

I think you can search youtube for the tutorials, but don’t follow them exactly, because most of them do not quite know how to do soldering XD. If you have a hot air gun it will be much easier, but it is still doable with solder iron. I suggest you to desolder the speaker from the board and remove the board from the case before doing anything. You can test and flash the ROM without reconnecting the board to display. You can flash the ROM with a pi or st-link adapter. I’m using a st-link adapter and I suggest to do so. It is a lot more stable and faster than using pi. Here are all the useful links of software that I’ve used. Backup and Unlock the G&W, do it before any hardware mod https://github.com/ghidraninja/game-and-watch-backup Patch original game so launch retro-go with SET+Left https://github.com/BrianPugh/game-and-watch-patch Orignal Retrogo from G&W https://github.com/kbeckmann/game-and-watch-retro-go Forked version that support cover art (I’m using this) https://github.com/olderzeus/game-and-watch-retro-go Convert MAME G&W games to Retrogo, you can download G&W games from any MAME archive. And google “Game and watch artwork” for the artkworks, you should able to find a google drive sharing folder https://github.com/bzhxx/LCD-Game-Shrinker

• InfluxDB

  www.influxdata.com sponsored

  Power Real-Time Data Analytics at Scale. Get real-time insights from all types of time series data with InfluxDB. Ingest, query, and analyze billions of data points in real-time with unbounded cardinality.

  

Suggest a related project