teslausb VS TeslaCamViewerII

On the TeslaUSB page, it lists the following Raspberry Pi's as options:

Main difference between the two scenarios, however, is that the 3 was left in a parking garage, while the Y was left in an open field. With the 3 in a parking garage, I don't think the vehicle went over 100 degrees, while the Y, being left in an open field, would sometimes hit about 150 degrees. Because the temperatures were more reasonable in the parking garage, I also left my Raspberry Pi running TeslaUSB in the car, where as with the Y being left in an open field and being subject to extreme thermal temperatures, I opted to use a regular USB thumb drive there.

I've found that using something like TeslaUSB reduces the "blip" quite a bit.

This has had issues since the newer 2021 Intel-based model 3s (and I presume others). https://github.com/marcone/teslausb/issues/564

teslausb with a high endurance microSD card.

If you have a Raspberry Pi 0 or 4 you can do a TeslaUSB which let's yoy access the footage over a WiFi gotspot on the thing and a better WebUI.

If you've driven more than an hour since the incident, the footage will be gone (unless you're using TeslaUSB, but I'm guessing not)

I use this for my Teslas Dashcam (it was built for it), but it also has a feature to rsync music files from a network share every time it connects to the network. Sounds like it would cover what you want, and it supports RPI Zero Ws natively.

https://github.com/marcone/teslausb

I set mine up 3 years ago and it's been set and forget - it auto uploads everything to my network drive. Never run out of space! I use TeslaCamViewer2 to play back the video

https://github.com/NateMccomb/TeslaCamViewerII.

TeslaCam Viewer II, it's old, but it's worked for many a year now.

If/when I see damage on the car, then I use TeslaCam Viewer II to review the footage from a folder that syncs with OneDrive, and I just scrub until I find the incident.

I run my videos through TeslaCam Viewer II, which I have linked on the side bar.

You can also use TeslaCamViewer II to watch all four clips at the same time.

TeslaCamViewer II. This is what I use to edit down my videos if/when I get them.

I use TeslaCam Viewer II - you can use whatever you want to watch the movies on Mac and Windows. I use this since it provides for location and easy view of all 4 cameras at the same time. Works great on Windows.

you can use TeslaCam Viewer II to view synced up footage of all cameras on your computer: https://github.com/NateMccomb/TeslaCamViewerII