t150_driver VS hid-tmff2

I would not bother. There's an unofficial driver for linux but it looks like it only partially supports force feedback. Force feedback is the only reason to use a wheel in the first place.

So, I'm basically trying to make my Thrustmaster TMX Pro work under Fedora 36. I already tried using [tmdrv](https://github.com/her001/tmdrv) with [scarabuto's T150 driver](https://github.com/scarburato/t150_driver) and [emtek995's TMX / TMX Pro driver](https://github.com/emtek995/TMX-driver). With both ways nearly everything is workig except the calibration with jscal, which shows the Axis to be about 30000, instead of the correct 60000 large. As a result I have a weird deadzone of about 20° in every direction from the center. In Windows everything works fine.

I was struggling a while back with these drivers, but couldn't make it work. Specifically I use Thrustmaster T150, so might be that my model isn't supported

t150_driver

I have a thrustmaster T150 steering wheel for my PC, and I installed a driver from this github page, and it worked right away when I launched euro truck simulator 2 in the native version. But becasue I found out that the native version has significantly worse performance than proton and it didn't support vkBasalt, I switched. When I launched ETS2 with proton, it was not detected anymore.

There are kernel modules for other Thrustmaster wheels such as the T150 and T300RS but not the T80, unfortunately.

-Thrustmaster T150 with T150_driver

I'm successfully using t150_driver with my Thrustmaster T150 in Eurotrucks 2 on Linux (Ubuntu 20.04).

you should reply directly to the user so I get a notification when you respond, I only noticed this post by chance. Anyways something like this should work https://github.com/scarburato/t150_driver/blob/master/files/etc/udev/rules.d/10-t150.rules but you will have to replace the name/model id/vendor id with the appropriate ones, I'm surprised that tmdrv doesn't have an example rule

If you own a T150 or T300RS Thrustmaster wheel, you have this drivers: https://github.com/scarburato/t150_driver

I already found this but im such a noob to linux i can't complete the installation since i don't completely understand how i'm supposed to do it.

I play Automobilista2, Dirt Rally 2.0, Dirt4, Dirt3, AC, BeamNG.drive . I use the hid-tmff2 wheel driver (dkms module). Protopedal script for pedal/device emulation. Or sometimes xboxdrv if protopedal doesn't fit my use case perfectly. Everything works fine(tm) but of course as is the Linux way, things do need fiddling sometimes. But I like the learning experience and treat it more like an additional hobby.

hid-tmff2

Not sure if this will help or not. Linux kernel module for thrustmaster t300rs and t248

My question is pretty much the title. Its obvious that https://github.com/Kimplul/hid-tmff2 supports the Thrustmasrter T300 RS but I am not sure about the GT version.

Not completely true. There exists a driver for Thrustmaster T300: https://github.com/Kimplul/hid-tmff2 Other wheels I also have seen supported are some fanatec wheels: https://github.com/gotzl/hid-fanatecff

There are a Linux module driver for this Wheel (and others). You can find it here: https://github.com/Kimplul/hid-tmff2

I tried ACC and Raceroom on Linux (Manjaro)with the T300 am hid-tmff2 Module. ACC worked fine, but at first was having problems with the Wheel profiles. Had copied the Game settings from Windows, but after deleting everything and creating a new profile it was fine. Raceroom has a problem with the T300, Game starts fine but the Wheel pulls to the right and it's not drivable. Only without FFB. https://github.com/Kimplul/hid-tmff2/issues/39