setup-ipsec-vpn VS algo

I can't connect to VPN. I have run VPN on this Raspberry Pi via IPsec. All of a sudden it stopped working. I tried installing IPsec on another Raspberry Pi, with no success, the same problem. I can't connect.

I have set up a vpn server using this, https://github.com/hwdsl2/setup-ipsec-vpn. I am able to log into the server and shut it down if I chose.

ok so here is the deal... I am currently running this script on a rpi at home that also runs a pihole... I do this for 24/7 ad blocking on my phone and to get around blocks on public wifi...

First, go here and use this setup https://github.com/hwdsl2/setup-ipsec-vpn . I put this on a raspberry pi and it works great, but you can put this on an old laptop or really anything.

you can run your own vpn node on some cheap vps server using algo (https://github.com/trailofbits/algo) or this: https://github.com/hwdsl2/setup-ipsec-vpn

Since we're already presuming you have a functional PFSense box with Wireguard installed and a VPS stood up, now you need to get Algo installed on the VPS. I'm not going to write this part out in detail, but basically you need to follow the procedures here to get Algo installed. However, *before* running ./algo you probably want to edit some of the config.cfg settings. I disabled IPSec (which saves a bunch of package installs and prevents a bunch of failures I saw on some of my VPSs), set my reduce_mtu setting to 80 just to prevent any MTU issues down the line, turned off DNS encryption, and renamed my users to the servers in question (for example: pfsense, vps_server, etc)

Check out the command line args for Auto1111, it talks about a gradio setup that can be accessed remotely. There's a time limit on gradio links though, I think. You could also set up a vpn that will allow you to access your PC remotely, then run A1111 with the --listen command and access it that way. I've done this with an Algo VPN on Azure and a Wireguard client for Windows for Android, but any VPN that lets you access your PC remotely would work.

One way you could try to get around is building your own VPN service, like this: https://github.com/trailofbits/algo/blob/master/README.md

Things I have tried so far: Clear network cache and reset adapters - IDK it fix aprevious problem I had https://github.com/trailofbits/algo/discussions/14504

(I can simply install Algo and get the Wireguard tunnel working, easy peasy... But from there, I can never get Plex port 32400 open... so I'm just trying from scratch now...)

Maybe try running algo vpn (following the road-warrior setup) in a VM instead? It has very light requirements. https://github.com/trailofbits/algo/blob/master/docs/deploy-to-ubuntu.md