rpi-eeprom VS MicroPython

I don't have Pi 5 to check this, but from what I've read, it does not support PPS. And such support is required; otherwise, even with a source that supports PPS, the connection will behave in a non-PPS fashion.

Apparently, cable quality is also demonstrating itself to be a significant factor in the Pi 5 power supply environment.

Regarding both these points:

https://github.com/raspberrypi/rpi-eeprom/issues/497

I should note, I updated the eeprom, USB hub, and network firmware using the images provided from the following repository: https://github.com/raspberrypi/rpi-eeprom. So it certainly isn't a corrupted eeprom chip, and if it was I wouldn't be able to boot the old installation I pulled from my backup drive.

Its a known issue with the current Pi 4 boot firmware. The net install option is trying to look for a keyboard and gets confused with some HIDs.

I was working on a final project for my class and needed an adc. So I ordered an ADS1115 and I had to solder the pins onto it. I've never soldered before, but I tried my best. Didn't look amazing, but didn't look like any pins were getting shorted so I plugged it in to the Pi. I then noticed that my ssh disconnected and couldn't reconnect. Tried plugging in the HDMI and there was no video output. I tried flashing a new OS onto it, didn't work. Tried EEPROM recovery from here and it didn't work. So I think I killed the Pi. It doesn't feel like it's getting warmed up or anything.

See https://github.com/raspberrypi/rpi-eeprom/blob/master/firmware/release-notes.md

I try to reset the pi as factory settings (following this github advice). I use pi-imager to set my SD card to lead the pi using USB boot priority and plug a USB key with raspbian OS (no desktop) and now getting green screen when booting. Think that the pi is dead.

I think it was this one:

https://github.com/raspberrypi/rpi-eeprom/blob/master/firmwa...

I had the same problem as you, updated my eeprom and the problem was fixed

Firmware: https://github.com/raspberrypi/rpi-eeprom/releases/tag/v2020.09.03-138a1

Just putting my hand up to say that MicroPython is awesome (and runs on the RP2040). https://micropython.org

Gah, I just ordered one on impulse [1]. I've wanted to build out a WiFi PDA for quite some time now and I like this hardware.

I'm quite liking the idea of running tulip MicroPython [2] on it, or going back to pure MicroPython [3] and writing some drivers. Apparently something like ampy can be used to upload/download Python files [4].

Threads could be quite exciting for running multiple programs at once [5], although I have no idea what it means for two programs to fight over GPIO! It does seem as though MicroPython can only utilise a single core [6].

[1] https://www.lilygo.cc/products/t-deck?variant=43087936487605

[2] https://github.com/bwhitman/tulipcc/tree/main/tulip/tdeck

[3] https://docs.micropython.org/en/latest/esp32/tutorial/intro....

[4] https://www.digikey.co.uk/en/maker/projects/micropython-basi...

[5] https://docs.micropython.org/en/latest/library/_thread.html

[6] https://github.com/micropython/micropython/issues/8197

If you really want to engage in the travesty that is shoehorning a high level scripting language into an environment that has 512 bytes of RAM and less clock cycles than an electric toothbrush, there is micropython.

There is some work to implement a common CAN interface in micropython but it's some way off yet: https://github.com/micropython/micropython/pull/13149

https://github.com/raspberrypi/pico-sdk/ links to a PDF about connecting to the interwebs with a pi pico.

micropython/micropython//ports/rp2/boards/RPI_PICO_W: https://github.com/micropython/micropython/tree/master/ports...

raspberrypi/pico-sdk /lib: btstack, cyw43-driver, lwip, mbedtls, tinyusb https://github.com/raspberrypi/pico-sdk/tree/master/lib

raspberrypi/pico-examples//pico_w/wifi/access_point/picow_access_point.c:

https://github.com/raspberrypi/pico-examples/blob/master/pic...

There's an iperf opkg pkg, or is it just netperf (which works with fluent)?

raspberrypi/pico-examples//pico_w/wifi/iperf/picow_iperf.c:

Needed for hobby project, maintained by very small team. Haven't decided on specific microcontroller. Needed for general bit-banging, speed and code size are not priorities.

So far have considered MicroPython [0] [1] and Lua [2] [3], but open for suggestions for others.

What are experiences?

[0] https://micropython.org/

Python is also a general-purpose programming language. It's typically used on desktop / laptop computers. But Micropython is a variant that can be used to program embedded devices.