rpi-clone VS PiShrink-to-Crontab

I've been running a bunch of Pi's for years now, and the biggest problem I've had is the Pi itself dying: 24/7 usage is hard on a small device. I've also found that stable power is essential, and to that end I've always used 5v 3a branded power cubes, plugged into a pure sine wave UPS. Choice of micro-SDHC cards is important and I ended up getting ATP industrial cards (https://www.atpinc.com/products/industrial-sd-cards) - expensive but really long-lived. Finally, using RPi-clone (https://github.com/billw2/rpi-clone) on a regular basis has been a life-saver. I clone to Sandisk Extreme micro-SDHCs and can recover from an outage in minutes.

I would normally use the Pi SD-Card copier to duplicate the SD-Card to an SSD but I'm unsure if this is available on the Ubuntu image - you could possibly use this program [Github] if you are not keen on using dd with a running system.

Then you will need to clone the SD to the SSD, you can use many tools that are available from your desktop computer or you can try with rpi-clone, just connect the SSD with Pi booted from SD, stop any possible service/docker to prevent any copy error and run, adapting device naming but usually will be (check device with dmesg):

I used rpi-clone, it was super easy. Whole process took 10 minutes. https://github.com/billw2/rpi-clone

rpi-clone

This work on all my Raspberry : https://github.com/The-Exterminator/PiShrink-to-Crontab

You Can backup with this : https://github.com/The-Exterminator/PiShrink-to-Crontab Work 100% for me, and the .img file Can you restore to sd card or usb.

I do that with PiShrink-to-Crontab and it work on RP3 and RP4, and i make the image small, like raspberry image self.