PlatformIO VS jsoniter

For the ESP32 in read mode, we've successfully developed a project using PlatformIO that accepts the key during build time and stores it in memory.

Check out Zephyr OS and Platform IO. Zephyr is part of the Linux foundation and has similarities to Linux with how it performs hardware abstraction (device tree). Platform IO integrates with other frameworks including mbed and Arduino.

PlatformIO together with avr-stub can be used to do source level debugging but there are some caveats.

Look into https://platformio.org/, it can abstract over a few RTOSes, and can show you which OSes work with which chips/boards.

If the HW looks like it works, you could also try alternate programming software. (e.g. TinyGo or PlatformIO)

You might have better luck with PlatformIO than the Arduino IDE; it's better at automatically choosing the serial port, though I can't say I've used it under Windows.

My other suggestion takes more work but will make your life oh so much better. Professionally I have used and highly recommend. https://platformio.org/ which is free!

Will you be doing embedded Linux? Embedded RTOS? Bare metal? Microcontrollers? SoC (say, FPGA with a hard processor core)?

You can do a lot with QEMU. https://bootlin.com/ has a lot of great, free training material.

https://bootlin.com/doc/training/embedded-linux-qemu/embedde...

is one of my favorites.

Learning to cross-compile, do embedded debugging, the process of booting an embedded system (which varies depending on the answers to the above questions), learning how to read a technical reference for the processor you’re using as well as for peripherals you’re likely to interact with - SPI, i2c, UART, maybe PCIe, are all handy skills. Learn a bit about JTAG, hardware, reading schematics, etc. Even being able solder is helpful.

There may be books (I had a great embedded Linux book when I started) but there are lots of online materials too. Check out https://platformio.org/

There are fun embedded boards and projects for microcontrollers too - micropython on an rpi pico, tinygo, eLua, etc.

Since most of the time would be spent decoding json, you could try to cut this time using https://github.com/bytedance/sonic or https://github.com/json-iterator/go, both are drop-in replacements for the stdlib, sonic is faster.

We all know the builtin golang JSON parser is slow.

How about doing comparisons against other implementations?

Like this one: https://github.com/json-iterator/go

Json-iterator (https://github.com/json-iterator/go), you can replace all of encoding/json with this. It does the same thing but it's faster.

Do you want to look at every field all at the same time? If not, you can pick out individual fields. There's other packages such as https://github.com/tidwall/gjson or https://github.com/json-iterator/go that let you pass in paths such as "a.b.c" to extract single fields.

For each Go type used within the config, we generate a separate unmarshaller function. The unmarshallers use json-iterator to process the output from CUE, while tracking the path within the config to the unmarshalled value. This path tracking will allow the function to check if live overrides have been provided on that path and return the override instead.

https://github.com/json-iterator/go an alternative JSON encoding package which allows to stream (flush out) encoded data as soon as it's able to (which is in contrast with the stock package which buffers everything until the encoding is known to be complete and OK).

What to use Easyjson is about the top of the pack and it's straightforward. The downside of efficient tools is that they use code generation to create the code required to turn your structs into json to minimise allocations. This is a manual build step which is annoying. Interestingly json-iterator also uses reflection but it's significantly faster. I suspect black magic.

jsoniter for low level access to JSON encode and decode

Takes like 10 minutes to write and parses very efficiently. https://github.com/json-iterator/go looks like it can provide such simple parsing