esp8266_deauther VS tasmotizer

Hashcat Cracking WPA/WPA2 Spacehuhn's Deauther

While magnet won't work, for wifi cameras you can safely and remotely deauthorize them (well, them and every other device on that access point) - tech is cheap and easily available (we're talking about $3 worth of hardware). Wired cameras generally don't enjoy ESD on their Ethernet cable pins. You can easily provide them with some using a piezo clicker from a cheap lighter.

Could I use a pi pico w to create a wifi deauther, like this ESP8266 Deauther | ESP8266 Deauther

Upload this on the bord https://deauther.com/ and have fun.. i use it to kick my nephew alle the time 😆🤣

here is link to the code https://github.com/SpacehuhnTech/esp8266_deauther

I already have a pwnagotchi, it’s not what im looking for in this case. I’m thinking more a pico version of this GitHub

With that said, I went this route and used the deauther app that comes pre installed with the [REDACTED] firmware.

If you use a d1 mini it has usb, just use https://github.com/tasmota/tasmotizer

Oh, that's sad. It seems like such low hanging fruit to support it. There is already a pull request to add the support that OP could use and test.

We start with a couple sensors for temperature, humidity, and particulates. Those connect to an ESP8266 via I2C and some proprietary IKEA protocol. That IKEA protocol wasn't in the default build, so I had to enable a define and rebuild. They've made very cool use of Gitpod so I didn't even have to install anything. I used Tazmotizer.py with a USB programming fixture I got off Amazon to load my custom firmware to the board.

It’s a SonOff Basic and flashed it with Tasmotizer. It didn’t work with the first try but after the third it works pretty well. I was too lazy to solder the pins on it. But if you have many of them, it would be great when you can upload it without a pc.

Incase you don't have a flasher,tasmotizer is an super easy software to flash a single bin file. https://github.com/tasmota/tasmotizer/releases/download/v.1.2/tasmotizer-1.2.exe

Flashing software https://github.com/tasmota/tasmotizer/releases

do i have to do the wiring and run Tasmotizer ?i assume not because the tasmota interface comes up just fine.

Tasmotizer is probably the easiest way to serial flash in Windows (and has cross platform versions for Mac and Linux). That said, it does require a hardwired serial connection.

Hands down easiest way is with Tasmotizer on Windows with a 3.3v FTDI. It's virtually plug and go.