CUPS VS brlaser

If your printer for example supports IPP and Postscript or PDF then that would be possible. Higher end (commercial) HP printers usually offer this functionality. Take a look at CUPS [1] if you want to know more about IPP.

[1] https://www.cups.org/

Your best bet is to set up a print server. The support page even has a CUPS driver. CUPS is well known for supporting a lot of printers. I run it on an old Mac-mini running Ubuntu. You can run it on something as small as a Raspberry Pi.

Apple should be more open about their removals. It isn't clear how this affects their CUPS implementation or PostScript printers https://www.cups.org

CUPS is under the Apache License 2.0 , so they can just use it, if they wanted: https://github.com/apple/cups/blob/master/LICENSE

They won't of course.

CUPS printing server

Another alternative is for you to set up a print server in VLAN20. Then set up the print server to print to the printer in VLAN99. CUPS is pretty easy to set up.

But after both Apple and Linux switched their CUPS-based printing systems to Python 3 or some other breaking change that I don't mind to understand, the only way to print a document seemed to be using a PC running Microsoft Windows. So I had to save a PDF in the cloud or email it to myself, then startup Windows on a laptop physically connected to the printer, start the printing process, check if the paper has been printed successfully, and shut down Windows. What a waste of time and energy!

Another option is to set up a print server. There are free print server programs that you can run on a computer. CUPS is pretty popular. I used to run it on a Raspberry Pi for an ancient LaserJet 1012. That printer just keeps going.

I use a different Brother, but had a similar problem, larger documents wouldn't print or would cutoff. The official br-laser project has not made a release in over 4 years. Meanwhile, there is at least one unreleased patch in the master branch that fixes problems like these. I ended up switching to a fork that is being updated, including the fix(es).

I have the wired version of this - and it has been fine too. The one issue with the wired version is that there are no good Linux drivers, brlaser [0] kind of works - but fails with certain documents.

[0] - https://github.com/pdewacht/brlaser

The only thing that worked for my brother laser on a raspberry pi was an unmaintained driver though.

*brlaser* worked for me https://github.com/pdewacht/brlaser

I use: https://github.com/pdewacht/brlaser. Works way better than the "official" Brother print drivers. Also, don't forget to install Ghostscript

I have no idea, the drivers for mine only come in 32-bit variety and only as deb or rpm, i haven't bothered with them. Brlaser works okay though.

I bought a Brother HL-L2320D which at the time was the cheapest mono laser with duplexing I could find. On Windows and macOS it's fantastically uneventful, unfortunately on Linux the situation is less great. brlaser [0] does mostly work, but it seems there is a bug as some more complex documents (typically scans) won't print [1]. I ended up patching my version to reduce the size of one of the buffers [2], and haven't seen it fail since, but I doubt I've actually fixed the issue and instead just moved the threshold.

[0] - https://github.com/pdewacht/brlaser

[1] - https://github.com/pdewacht/brlaser/issues/79#issuecomment-7...

[2] - https://github.com/benpye/nix-config/blob/main/overlays/brla...

After a couple of DDG searches, I found brlaser - a community-driven Brother driver. Perfect! I installed CUPS, compiled the driver, and shared the printer over the network.