corundum VS NvChad

The GPU uses this: https://github.com/alexforencich/verilog-pcie . And there is an open-source 100G NIC here, including open source 10G/25G MACs: https://github.com/corundum/corundum

Well, I did build this: https://github.com/corundum/corundum

I would look into 10GbE PCS/MAC packet processors implemented under AXI Stream interfaces for example. There are open source examples https://github.com/corundum/corundum and https://netfpga.org/ .

I built my own 100 Gbps capable NIC, along with driver: https://github.com/corundum/corundum. You're welcome to ask if you have any questions, though it is quite a different animal from a 100 Mbps NIC you might have on a microcontroller.

If you're looking for resources, here's one rather comprehensive example of a high-performance FPGA design with a fully custom DMA engine and driver, that runs on both Xilinx and Intel FPGAs: https://github.com/corundum/corundum

I have no idea, but you're welcome to build the design and look at it yourself: https://github.com/corundum/corundum/tree/master/fpga/mqnic/NetFPGA_SUME/fpga. The barrel shifters are in the DMA engine, both the read DMA and write DMA engines have wide barrel shifters.

Dive right into the slack channel and introduce yourself. There is also a new contributor guide. /u/alexforencich/ is on these reddits and he may be able to chime in and give you more concrete suggestions.

NvChad

If you use Android device, you can try Termux , and in Termux I recommend NavChad as IDE . You can also find a lot of other useful packages .

git clone https://github.com/NvChad/NvChad $HOME\AppData\Local\nvim --depth 1 && nvim # if the above path doesnt work, try any of these paths : %LOCALAPPDATA%\nvim %USERPROFILE%AppDataLocal\nvim C:Users%USERNAME%AppDataLocal\nvim

line 1: you would have to copy it and remove all the nvchad keymaps and additionally reformat your keymaps to adopt this format. for example, if you copied the file in the link to lua/user/mappings.lua I believe you can just replace the first line with:

I'm confused as to why this is happenening as I have been able to load LunarVim and NvChad with any problems whatsoever.

I would suggest to start getting into vim by first trying out popular vim keybinding plugins available on your favorite code editor and get used to those first. Then, if you want to dive deeper into the power of Neovim, try out popular configs like LazyVim, LunarVim, NvChad... Taking Neovim from a mere text editor to a full-featured IDE with features like intellisense, debugging, testing, etc... on your own takes quite a lot of work and configuration.