build VS octocitrico

https://github.com/armbian/build

There isn't any hypervisor running on that and still no SVE

The number of boards supported by these two distros is astonishing:

https://www.armbian.com/download/

https://dietpi.com/#download

The NanoPC-T6 is already supported by Armbian build system:

https://github.com/armbian/build/tree/main/config/boards

It's my understanding that https://www.armbian.com/ has quite broad hardware support, and there are boards from Orange Pi and Pine64 that boast actual mainline kernel support, so this is more a case of a fragmented ecosystem than there being zero competitors that can meet or exceed pis.

The normal Raspberry Pi OS Lite is pretty okay.

https://www.armbian.com/ is also pretty awesome and also supports bunch of other RaspberryPi clones for cheaper price.

git clone https://github.com/armbian/build cd build ./compile.sh BOARD=orangepi5-plus RELEASE=jammy BUILD_MINIMAL=yes KERNEL_GIT=full BUILD_DESKTOP=no BUILD_ONLY="u-boot,kernel,armbian-config,armbian-zsh,bootstrap" KERNEL_CONFIGURE=no

If the SBC is supported by Armbian then the software support is usually pretty good.

https://www.armbian.com/

I use an old Android media player, repurposed with Ubuntu OS instead of Android (https://www.armbian.com/). Works fine, cost me nothing ($40 originally AFAIK, but it was being retired anyway). It has low power consumption, good reliability, more-than-adequate performance for HA and Plex media server. Equipped with multiple USB ports, ethernet, WiFi, HDMI.

octoprint for other fruits

Hi, I'm trying to connect an octoprint with a prusa mk3s. Unfortunately without success. After selecting the appropriate baudrate and port, the octoprint enters the "connecting" status and then after a few seconds it goes offline again. The banana pi is connected to the prusa directly to the motherboard, exactly the same as you would connect a raspberry pi zero. Connections seem to be fine so it seems to me that maybe this problem may be on the software side (I'm using octocittico)

I just installed the OrangePi 3 LTS release of Octocitrico (an Armbian Linux distribution with octoprint installed and configured) https://github.com/ludiazv/octocitrico

Image download

I am just meaning even the preview for setting it up doesn't show anything, sorry for vagueness, I am new to octoprint! Im using it installed on armbian, I am using this https://github.com/ludiazv/octocitrico on rock64, All seemingly works besides that, I can connect to octoprint from my phone or pcs on my network.

Has anyone tried to install octoprint on bpm2z under some system or some separate working distro? Unfortunately, manual installation under raspbian does not bring any effects, it is caused by numerous errors resulting (from what I think, from the lack of official support). I also tried"Octoprint for other fruits", but I failed on that too, unfortunately I don't know much about linux and I have problems with building an iso file from shared files from the repository

Used Octocitrico to image and had a few issues getting the webcam to work, but the guy who made the image is very good at responding to issues and trying to help out so I got the webcam server to work a couple days later.

I got an orange pi zero 2 since I couldn't get a raspberry pi to control my 3d printer using octoprint. I followed this guide (https://github.com/ludiazv/octocitrico) and for the most part it has worked as expected. The only issue I'm having is that when I reboot the system for whatever reason, it would not reboot after it shuts down. I unplug the usbc, plug it back in, the fan turns on and the ethernet lights blink, but I get no status led light no matter how long I leave it plugged in. I can eventually get it to turn on if I keep unplugging and plugging in the usbc and ethernet cable, but I really want to just set it and forget it and not worry about it. I also got an orange pi 3 lts, and that one works flawlessly. Is this a known issue?