balena-rpiplay VS wireless-carplay-dongle-reverse-engineering

I‘ve used RPiPlay as an AirPlay mirroring server. You can set it up to run at startup and only be visible during active connections. This means that everything will work just like always until someone connects using screen mirroring.

You might give a try to https://github.com/FD-/RPiPlay

Some background: I'm using a Pi Zero W Rev 1.1 hooked up to a TV over HDMI, acting as an AirPlay mirroring server (using RPiPlay). I'm running Raspbian Buster since I had problems building RPiPlay on Raspbian Bullseye. I have pulseaudio 12.2 installed, and I'm using gstreamer 1.14.4 as the audio renderer for RPiPlay.

Use Raspberry Pi as Airplay server to screen mirror on TVs, monitors, projectors\ (39 comments)

Some useful info here: https://github.com/45clouds/WirelessCarPlay https://github.com/ludwig-v/wireless-carplay-dongle-reverse-engineering

So, in an effort to save it: When plugged to the wall, red light turns on and that's it. I was unable to flash it with any of the files found at https://github.com/ludwig-v/wireless-carplay-dongle-reverse-engineering ... might be there's no appropriate fw for CP2A model.

Depending on your model, you can try installing a different firmware using a USB stick. This page has firmware for the Carlinkit 3.0 dongles - which also works with noname CPC200-U2W-Plus dongles like mine. I've flashed mine a few times, and I haven't managed to kill it yet :-) (Make sure you follow the instructions in the bottom of the page)

Download a firmware from here: https://github.com/ludwig-v/wireless-carplay-dongle-reverse-engineering/tree/master/Firmware (Read the instructions at the bottom of the page, as they might change since this post was written)