algo VS split-vpn

Since we're already presuming you have a functional PFSense box with Wireguard installed and a VPS stood up, now you need to get Algo installed on the VPS. I'm not going to write this part out in detail, but basically you need to follow the procedures here to get Algo installed. However, *before* running ./algo you probably want to edit some of the config.cfg settings. I disabled IPSec (which saves a bunch of package installs and prevents a bunch of failures I saw on some of my VPSs), set my reduce_mtu setting to 80 just to prevent any MTU issues down the line, turned off DNS encryption, and renamed my users to the servers in question (for example: pfsense, vps_server, etc)

Check out the command line args for Auto1111, it talks about a gradio setup that can be accessed remotely. There's a time limit on gradio links though, I think. You could also set up a vpn that will allow you to access your PC remotely, then run A1111 with the --listen command and access it that way. I've done this with an Algo VPN on Azure and a Wireguard client for Windows for Android, but any VPN that lets you access your PC remotely would work.

One way you could try to get around is building your own VPN service, like this: https://github.com/trailofbits/algo/blob/master/README.md

Things I have tried so far: Clear network cache and reset adapters - IDK it fix aprevious problem I had https://github.com/trailofbits/algo/discussions/14504

(I can simply install Algo and get the Wireguard tunnel working, easy peasy... But from there, I can never get Plex port 32400 open... so I'm just trying from scratch now...)

Maybe try running algo vpn (following the road-warrior setup) in a VM instead? It has very light requirements. https://github.com/trailofbits/algo/blob/master/docs/deploy-to-ubuntu.md

With Router side VPN it shows up in the DPI.

yes i as well think this is sad that such things are not passible "easy" through the frontend. you can look at https://github.com/peacey/split-vpn to see if you can get such working but its then not an out of the box solution again.

Honestly just use this, it works wonderfully with wireguard vpn providers and you can assign a specific subnet, VLAN, or interface to the VPN tunnel.

This is what I use. I have a wifi and connected to a separate vlan that routes through my openvpn connection provided by expressvpn. Any device connected to that wifi goes through the VPN connection. https://github.com/peacey/split-vpn

I use wireguard on the UDM Pro unofficially to route as a client, and here's some extensive performance testing I did. Typically, the UDMP/SE is perfectly able to saturate a 1 Gbps connection up and down through wireguard.