Striptease VS FastLED_examples

BTW, if you're using a Teensy 4.x you might be interested in my project.

I'm not aware of any general significance of DrawOneFrame functions. They don't invoke any particular FastLED behaviour. For projects where a variety of different effects can be presented, the author may choose to use C++ classes to provide a standard interface to initialise and display those effects. In my WavyDots sketch, that function name is a vestige of such a choice. The Aurora project does something similar. So does the Striptease project, but there the DrawOneFrame function is simply called loop.

Have you ever come across my project? Perhaps you might find some interesting ideas to borrow.

Hi, I faced the same problem in my project.

In my project I did something similar and created abstractions for composing virtual strips by joining, extracting a portion or reversing other virtual or physical strips. Have a look at the Strip API.

That's what I'm using in my project based on Teensy 4.1 + Audio shield for driving 6 channels in non-blocking mode and it works great!

I'm using it in my project for driving 6 channels (Teensy 4.x) without any problems.

If you plan to use the Audio shield in your project (as I do on mine), then two Serial ports won't be available (pins 8 and 20), leaving you with 3 and 6 serial ports available on standard pins.

I have developed a library/framework for this, and it allows decoupling the physical layout of your strips (up to six) from the logical layout.

Hi, have a look at my project. It's a library/framework for Teensy 4.x + Audio Shield.

In the previously linked version comparing colorCurrent.h == colorTarget.h or colorCurrent == colorTarget without the .h worked the same since the colors were fully saturated and at full brightness. Comparing colorCurrent == colorTarget compares the H,S, and V numbers all at the same time.

Use the first one for regular unchanging intervals. Use the second one when you need the interval to change over time. Here's one of Marmilicious' examples.

Depending on the complexity of the animations you want, you could power them through the Arduino directly with a library like FastLED. https://github.com/marmilicious/FastLED_examples/blob/master/MIDI_test_v1.ino is an example.

Take note in my example: https://github.com/marmilicious/FastLED_examples/blob/master/custom_pixel_array.ino