SSDTTime VS OpenCore-Install-Guide

Build SSDT-EC, SSDT-USBX, SSDT-XOSI, SSDT-PLUG, and SSDT-HPET from SSDTTime instead of manually https://github.com/corpnewt/SSDTTime

I'm trying to do a fresh install of Ventura. I tried using SSDTTime from my Catalina at first, only to discover that the option to dump DSDT is disabled by design because that'll not give me the unadulterated DSDT which makes sense.

Precisely, I went through the guide once more, discovered some new tools (like USBToolBox for example) then I did USB mapping + SSDTs (using SSDTTime) by hand (I was not sure that I did them properly in the first place, 3 years ago). Then with those clean SSDTs & kext, I used my old EFI and OCAT to merge everything together. Double checked everything at the end just to be sure that I did not forget a thing and that OCAT did not mess up anything.

I couldn't get past this point in mine without running https://github.com/corpnewt/SSDTTime and enabling `SetupVirtualMap` in Booter Quirks

It's a must though. Every PC is different, even 2 identical models might not have the same ACPI tables.. I would Start here.. There's only a few things you'll really need, especially on these machines. While there's many methods, a clean install of windows NOT booted through OpenCore, using SSDTime is the easiest for most.

I built my own SSDTs using SSDTTime.

OpenCore 0.8.7 / Dumping DSDT use SSDTTime for generate ACPI Tables / Use genSMBIOS for generate MLB (Board Serial), ROM (Mac Address), SystemSerialNumber (Serial), SystemUUID (SmUUID)

[1]: https://www.youtube.com/watch?v=DhN35HNsYDg [2]: https://dortania.github.io/Getting-Started-With-ACPI/ssdt-methods/ssdt-long.html [3]: https://dortania.github.io/Getting-Started-With-ACPI/ssdt-methods/ssdt-easy.html [4]: https://dortania.github.io/Getting-Started-With-ACPI/ssdt-methods/ssdt-easy.html#running-ssdttime [5]: https://github.com/corpnewt/SSDTTime [6]: https://dortania.github.io/Getting-Started-With-ACPI/Universal/ec-methods/manual.html#pnp0c09-already-has-an-sta-method

try mapping usb drive on windows first using USBToolBox as USBInjectAll isn't fully working anymore on Monterey. Also I suggest creating your own SSDT/acpi patches via SSDTTime.

If so, switch back to AppleALC and add SSDT-HPET.aml with the patches in the patches.plist generated in SSDTTime (https://github.com/corpnewt/SSDTTime).

Check dortania’s open core guide

To keep costs down, Keep an eye on local market place and classified sites for a cheapish gaming PC with an AMD card in it (RX’s 5700 / 5700xt / 5600xt / 6600xt / 6600). Look up the parts here on Reddit and https://dortania.github.io/OpenCore-Install-Guide/ to see if people have problems or methods needed to make them work.

Idk much about amd gpu support but u can check it on Dortania’s open core guide which I highly recommend you to follow

Btw u can follow this https://dortania.github.io/OpenCore-Install-Guide/

I have similar setup (i7 8700K, 5700XT, Asus Prime Z370-a), everything works, no issues (wifi with OCLP patches). All you need is here: https://dortania.github.io/OpenCore-Install-Guide/

Go through the Dortania Guide.

I exclusively used OpenCore Dortanias Guide. I also useed OC 0.9.5