Prusa-Firmware VS Voron-Afterburner

Maybe Prusa issue 602 can be somewhat relevant... https://github.com/prusa3d/Prusa-Firmware/issues/602

I’m aware that I have issue #602 going on here... But has anyone else experienced these more-obvious layer lines showing up whenever a new feature in the model is started? See the lines continuing along the walls that correspond with the steps and even the rear hole.

It doesn't appear to be related to this known bug: https://github.com/prusa3d/Prusa-Firmware/issues/4288

You should read the release notes for 3.12. https://github.com/prusa3d/Prusa-Firmware/releases/tag/v3.12.0

MK2/3: https://github.com/prusa3d/Prusa-Firmware/releases/tag/v3.12.0 (mentioned under Arc interpolation features G2/G3)

Now comes thermal modeling which has issues with Revo 6. I completed steps 5-16 on Github (see https://github.com/prusa3d/Prusa-Firmware/issues/4105). This eliminated almost all the Revo 6 issues associated with thermal modeling. I would always get a beep and "Thermal Anomaly" warning on the LCD. Not a fatal printer error but annoying.

On the GitHub you can browse previous releases. The Afterburner is in its own repository: https://github.com/VoronDesign/Voron-Afterburner

But my printhead front keeps deforming near the heatblock (part cooling air nozzle).

Repo: https://github.com/vorondesign/voron-afterburner

go straight for the Stealthburner toolhead instead of Afterburner, my guess is SB will become the stock setup soon anyway.

Thanks for the info but I did not managed to find help in those documents related to my issue. There was a identical problem described here https://github.com/VoronDesign/Voron-Afterburner/issues/6 and it was rejected although there are more users with the same issue

No, the printer is not the extruder. Printer HAS extruder with gears from bondtech. And no, mk3s has the same problem as other printers with direct dual gears extruder. Ofc if mk3s is a most used printer, most people will have problems with mk3s. For example voron has the same issue https://github.com/VoronDesign/Voron-Afterburner/issues/6

You can still use existing bowden adapter instead of Clockwork https://github.com/VoronDesign/Voron-Afterburner/tree/afterburner/STLs/Bowden Stealthburner is just the fan assembly and a hotend mount.

Also in this case I link you a video presentation: https://youtu.be/lmJkIXW5tXc And the page with the resources: https://github.com/VoronDesign/Voron-Afterburner In this case the assembly instructions are not there because there is a chapter about it in the assembly manuals of all the different voron printers. Like if you look at the one here, at page 72 of the manual you will find the instructions specifically for the afterburner and you can ignore the rest: https://vorondesign.com/voron_switchwire