OctoDash VS octo4a

The latest version of Pi OS (bullseye) broke the touch functions and some people are having luck rolling back the drivers. Head over to the github and read through because there are a few different fixes people have said worked for them. https://github.com/UnchartedBull/OctoDash/issues

It sounds like you only want it to run when you want, not automatically? I am not sure about Octoscreen, I only used that for a while before switching to Octodash ( no particular reason, I think it was the newer plugin when I was reloading the Rpi). I think Octodash asks if you want to run it automatically during the setup , so there is a procedure to run it only when you went. But it was easier to just run it all the time and I think there was a command to stop it when I didn’t want it. May not help, but though I would mention it. And I check and It does say you can choose to start automatically. https://unchartedbull.github.io/OctoDash/index.html. Using this screen HDMI

Also if you haven't heard of OctoDash I would definitely suggest you've it a try.

Octoprint has a built-in API server too which is documented here. There are several alternative frontends that use the API. Most popular being probably OctoDash and OctoScreen, and several mobile apps. But also the "Send to printer" button in your slicer uses that API, and of course OctoPrint's UI itself.

Hey i see there is a lot off progress with hacking and using the carthing for multiply applications... I hade an idea of using this to replace or add it to a 3d printer... There is an chrome extension that allows to control a 3d printer with serial output threw usb (gcode-sender). There are some really nice open source interfaces (octo-dash). (just an idea of how it look like). The main question is... can we hack carthing to send serial code through usb or from one of his test point on the board?

You may be able to get similar functionality with OctoDash and Octoprint.

OctoDash for example uses ratpoison over a fully fledged desktop environment. https://github.com/UnchartedBull/OctoDash

If you have a spare old(ish) Android phone you can look into Octo4A. Just be sure to connect the phone via power blocked USB cable to avoid your phone charing the printer... And you need a phone you can charge and use USB host at the same time. Some allow this via split cables (Type-c dongles) or if your phone has wireless charging.

As the video mentions https://github.com/feelfreelinux/octo4a :D I did need to get an adapter splitter and I only got it to work on a phone with USBC port, so nothing super old.

If you have a Android phone (or tablet), you can use the octo4a app.

At the bottom of the first post, this is what they recommend for Octo4A

I am honest, it is a bit more complicated and failure prone, but absolutly doable. octo4a

I run Octoprint on my laptop. Old Android phone is also an option.

I really need help with this one. I use an android tablet with Octo4a (https://github.com/feelfreelinux/octo4a) and some plugins work fine but f.e. octolapse not and I get this report.

For whoever needs to know what I mean by Octo4A please visit the developers GitHub: https://github.com/feelfreelinux/octo4a