Marlin-Alex VS Marlin-E5P

If you have the H32 chip then this FW might help as it has manual mesh levelling, or this one for other chips.

To be able to use the LCD screen on the C2 with Alex's you would need to modify the configuration and compile it yourself. It has been attempted by Classicrocker883 but he did not have a C2 with the H32 chip to test it so it seems that version has been abandoned. I can confirm it does install and appears to work fine on my old H32 board I use for testing, it connects to octoprint and seems to be working but I have no screen to try on it.

If anyone else is working on this problem, I solved it using this firmware: https://github.com/classicrocker883/Marlin-Alex/releases/tag/v2.0.1

look for this file here voxelab_aquila_Default-NP-G32-C2.bin

I actually made firmware for the C2 with a creality 4.2.7 board and the 12864 lcd you can find here.

I don't quite have the H32 ready. but u can try a version of Alex's here

if anything try one of these https://github.com/classicrocker883/Marlin-Alex/releases/tag/v2.0.1 the G32 option should work

try one of these UBL

I ended up running the firmware from this repo - https://github.com/roobre/Marlin-E5P mainly because I was too lazy to go dig through the firmware releases from creality and update the right places - it prints well for me, but you'll need to add the BLTouch configuration still.

Should I just go with the official firmware or rather my own compiled MarlinFW basing It from here: https://github.com/roobre/Marlin-E5P?