FanControl.Releases VS grub-mod-setup_var

You don't really need PID, just a decent fan curve with https://github.com/Rem0o/FanControl.Releases

I think you're looking for FanControl https://github.com/Rem0o/FanControl.Releases There is a bit of initial setup but nothing crazy, and it guides you through with a nice and clean UI. Once you're in, you can set your fan curve and all the smaller details if you want, like how long will the fans take to spin up or spin down, or how long to delay a speed change after hitting a certain temperature threshold so that its not constantly revving up and down

You could even replace all the fans with Noctua nf a12s and control using this and still have saved money: https://github.com/Rem0o/FanControl.Releases

MSI Afterburner should work for gpu fans. Motherboards typically have their own version of software for fan control, so you could use that (dl from mfg website), or there's this one that I know of that should work for any mobo (although there's probably others): https://github.com/Rem0o/FanControl.Releases

If your fans are heywire, draining your bats download fan control. Works great.https://github.com/Rem0o/FanControl.Releases

I've seen a lot of reccs pointing to https://github.com/Rem0o/FanControl.Releases if you don't want to stick with your BIOS to control fans.

Being a Corsair PSU, you might be able to control the fan curve with this open source fan software

This app relatively the same feature, but is not open source and run only on Windows

If HPET is not an option in firmware, then it is disabled (0x00) and hidden from you. Which in practice is bad. The only option for users in this case is to download your firmware from the vendor, use this tool to locate the register and set the value with this tool to enabled (0x01).

And you can do all the same things with this(https://github.com/datasone/grub-mod-setup_var), but it doesn't have a UI, so less convenient.

It is possible with a little bios edit. I did it with my old asus which I dont have anymore. All You have to do is follow this guide: https://www.reddit.com/r/Lenovo/comments/id0457/guide_to_reenable_undervolting_after_latest_bios/?utm_source=share&utm_medium=ios_app&utm_name=iossmf thing I did different is use https://github.com/datasone/grub-mod-setup_var/releases instead of RU.efi to boot my usb I sont remember why tho

You neaed to download setup_var

Download this file and place it inside BOOT

explanation: this is where maxdarksol begins skimping on explanation. download the efi file here. It's called modGRUBShell.efi instead of bootx64.efi. It doesn't matter, it's just a file name. Get a usb thumb drive, format it as FAT32. Open it and make a folder called "efi". Then in it another folder called "boot". Then put the modGRUBShell.efi file in it.

The efi file (modGRUBShell.efi) from release 1.3+ from https://github.com/datasone/grub-mod-setup_var/releases

Download the .efi from here and place it in the Tools folder of OpenCore, create a new snapshot in ProperTree or add it manually to the tools section in the config.

download https://github.com/datasone/grub-mod-setup_var/releases/download/1.3/modGRUBShell.efi and put in the EFI\BOOT folder in the USB pen and rename it as bootx64.efi .

I did this by using the Grub bootloader patched with setup_var (https://github.com/datasone/grub-mod-setup_var). Follow this guide to obtain the correct IFR values for setup: http://forum.notebookreview.com/threads/tutorial-xps-15-9550-9550-bios-advanced-options.810307/