FanControl.Releases VS LibreHardwareMonitor

You don't really need PID, just a decent fan curve with https://github.com/Rem0o/FanControl.Releases

I think you're looking for FanControl https://github.com/Rem0o/FanControl.Releases There is a bit of initial setup but nothing crazy, and it guides you through with a nice and clean UI. Once you're in, you can set your fan curve and all the smaller details if you want, like how long will the fans take to spin up or spin down, or how long to delay a speed change after hitting a certain temperature threshold so that its not constantly revving up and down

You could even replace all the fans with Noctua nf a12s and control using this and still have saved money: https://github.com/Rem0o/FanControl.Releases

MSI Afterburner should work for gpu fans. Motherboards typically have their own version of software for fan control, so you could use that (dl from mfg website), or there's this one that I know of that should work for any mobo (although there's probably others): https://github.com/Rem0o/FanControl.Releases

If your fans are heywire, draining your bats download fan control. Works great.https://github.com/Rem0o/FanControl.Releases

I've seen a lot of reccs pointing to https://github.com/Rem0o/FanControl.Releases if you don't want to stick with your BIOS to control fans.

Being a Corsair PSU, you might be able to control the fan curve with this open source fan software

This app relatively the same feature, but is not open source and run only on Windows

I really want to get this project https://github.com/LibreHardwareMonitor/LibreHardwareMonitor compiled and make some modifications.

OHM hasn't been updated since 2020. You want LibreHardwareMonitor instead.

I have posted previously on here before (although a long time ago) about my pc randomly powering off and then refusing to boot despite powering on. I was looking through some threads and someone recommended this hardware monitoring software (https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/releases). I've used hwinfo for years but this one seemed a bit more clean to see info in one go. Anyway I digress, having reseated my gpu, ram, CPU and even swapping out my PSU in the past, I saw on that but of software that my m.2 drive was reaching around 85 degrees Celsius. I know that's hot but would it be enough for the computer to shutdown to protect itself?

Install something like Releases · LibreHardwareMonitor/LibreHardwareMonitor · GitHub & log what is going on both temperature, wattage & voltage before a crash & then check to see if anything stands out.

There's LibreHardwareMonitor on Windows. The fantastic Fan Control uses it, allowing you to do things like control the speed of fans connected to the motherboard based on the temperature of the GPU—useful for me since I did the "zip-tied case fan" mod.

You can give LibreHardwareMonitor a go. It's open-source, and allows you to add systray icons for whatever you want from the list of HW it detects/supports by right click any item and selecting "Show in systray". You can also change the color of the systray icon by right clicking it and selecting "Change color", making it easy to distinguish between, say, CPU & GPU corresponding temps (or whatever values you chose to display).

Thanks! I'm using Libre Hardware Monitor, as it's what this python library supported as a sensor. https://github.com/LibreHardwareMonitor/LibreHardwareMonitor

LibreHardwareMonitor for GPU status monitoring

https://github.com/Rem0o/FanControl.Releases/issues/69 And https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/issues/1009