ESP8266Audio VS TFT_eSPI

Having an issue here using the ESP8266 Audio library (found here).

The Arduino sketch that works for me reads the data out of PROGMEM. When I use that same raw data in ESPhome, it crashes my ESP too. Would there be a way to play from PROGMEM in ESPhome too? Other ways in the library are a function or streaming, but that doesn't fit my use case unfortunately.

If you're getting started, the ESP8266Audio library makes it easy to play audio with the Arduino toolchain. For more advanced use cases, Espressif's own ESP-ADF has a lot of useful features and examples.

Not sure where you got that. According to the ESP8266Audio documentation, the default GPIOs are 2, 15, and 3. You're trying to change 15 to 13.

ESP8266Audio is really fun and easy to use

The ESP32 might suffice for that then, depending on what you consider to be basic applications. It certainly has wifi and bluetooth functionality and you can do audio with an extra chip or an interesting workaround. The ESP32-A1S module even has the necessary chip integrated but you'll likely need to roll a custom PCB for it.

I am simply using the sample code from here. https://github.com/earlephilhower/ESP8266Audio

Bodmer's TFT_eSPI is a graphics library for drawing to various displays, like the ILI9341, which is supported. It can be used with the Arduino IDE to program a Pico to interface with an ILI9341 using SPI, 8 bit parallel or 16 bit parallel interfaces.

For example, the electropeak link you posted showed a TFT LCD with the ILI9341 chip, and if you are using the TFT_eSPI library, this file needs to be configured https://github.com/Bodmer/TFT_eSPI/blob/master/User_Setup.h , the default configuration looks correct in this case.

Example Setup70b_ESP32_S3_ILI9341.h

Discription /* * Esp32 WROOM with iLi9341_TFT display * TFT_eSPI Library // https://github.com/Bodmer/TFT_eSPI * * ESP32Encoder Library // https://github.com/madhephaestus/ESP32Encoder.git * * DIGITEN G3/8 Water Flow Hall Sensor * Red - VIN(5v) * Black - GND * Yellow - D2 * * */ Enable TFT_eSPI Library #include // Hardware-specific library #include TFT_eSPI tft = TFT_eSPI(); // Invoke custom library ESP32ENCODER Setup ``` #include

``` /* * Esp32 WROOM with iLi9341_TFT display * TFT_eSPI Library // https://github.com/Bodmer/TFT_eSPI * ​ * ESP32Encoder Library // https://github.com/madhephaestus/ESP32Encoder.git * ​ * DIGITEN G3/8 Water Flow Hall Sensor * Red - VIN(5v) * Black - GND * Yellow - D2 * ​ * ​

My favorite Arduino compatible graphics library is https://github.com/Bodmer/TFT_eSPI

I was under the impression that since this display uses a ST7789V, I'd be able to use the TFT_eSPI library which has support for this controller with ESP32 board. Is that a correct assumption on my part?