ESP32Marauder VS esp8266_deauther

Have you looked thru here may be useful. Does this screenshot help?

You can flash the board via the flipper app, or with a pc. Check this out https://github.com/justcallmekoko/ESP32Marauder/wiki/installing-firmware-via-ota

but in release page https://github.com/justcallmekoko/ESP32Marauder/releases/tag/v0.10.8 there is only firmware esp32_marauder_v0_10_8_20230621_flipper_sd_serial.bin

The WiFi marauder CAN connect to an access point and be part of same network as the victim. With some arp spoofing/poisoning you can pull off a basic MITM atk and save the traffic to the flipper SD card. Maybe even print it on the screen to show the audience in real time.

Is this what you need? https://github.com/justcallmekoko/ESP32Marauder/wiki/flipper-zero

Here we have the GitHub wiki made by said author with a pretty in-depth walk-through

Hashcat Cracking WPA/WPA2 Spacehuhn's Deauther

While magnet won't work, for wifi cameras you can safely and remotely deauthorize them (well, them and every other device on that access point) - tech is cheap and easily available (we're talking about $3 worth of hardware). Wired cameras generally don't enjoy ESD on their Ethernet cable pins. You can easily provide them with some using a piezo clicker from a cheap lighter.

Could I use a pi pico w to create a wifi deauther, like this ESP8266 Deauther | ESP8266 Deauther

Upload this on the bord https://deauther.com/ and have fun.. i use it to kick my nephew alle the time 😆🤣

here is link to the code https://github.com/SpacehuhnTech/esp8266_deauther

I already have a pwnagotchi, it’s not what im looking for in this case. I’m thinking more a pico version of this GitHub

With that said, I went this route and used the deauther app that comes pre installed with the [REDACTED] firmware.